Hardware device error Monitor

AP.Remote.Access.Hardwaredeviceerror (UnitMonitor)

The connection attempt failed because the device connected to the port is not responding.

Knowledge Base article:

Summary

The connection attempt failed because the device connected to the port is not responding.

Causes

Hardware device connected to the port is not responding.Sample Event: The communication device attached to port %1 is not functioning.

Resolutions

In Control Panel, use the Add Hardware Wizard to troubleshoot the device error. If you cannot correct the problem, contact the hardware vendor.

Microsoft Corporation, all rights reserved

Element properties:

TargetAP.Remote.Access.Class.VPNServer
Parent MonitorSystem.Health.AvailabilityState
CategoryAvailabilityHealth
EnabledTrue
Alert GenerateTrue
Alert SeverityError
Alert PriorityHigh
Alert Auto ResolveTrue
Monitor TypeMicrosoft.Windows.SingleEventLogManualReset2StateMonitorType
RemotableTrue
AccessibilityPublic
Alert Message
Hardware device error Monitor
The connection attempt failed because the device connected to the port is not responding.
RunAsDefault

Source Code:

<UnitMonitor ID="AP.Remote.Access.Hardwaredeviceerror" Accessibility="Public" Enabled="true" Target="AP.Remote.Access.Class.VPNServer" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="Windows!Microsoft.Windows.SingleEventLogManualReset2StateMonitorType" ConfirmDelivery="true">
<Category>AvailabilityHealth</Category>
<AlertSettings AlertMessage="AP.Remote.Access.Hardwaredeviceerror_AlertMessageResourceID">
<AlertOnState>Error</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>High</AlertPriority>
<AlertSeverity>Error</AlertSeverity>
</AlertSettings>
<OperationalStates>
<OperationalState ID="EventRaised" MonitorTypeStateID="EventRaised" HealthState="Error"/>
<OperationalState ID="ManualResetEventRaised" MonitorTypeStateID="ManualResetEventRaised" HealthState="Success"/>
</OperationalStates>
<Configuration>
<ComputerName>$Target/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<LogName>System</LogName>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">20013</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">PublisherName</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">RemoteAccess</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</Configuration>
</UnitMonitor>