0x000E02050003
Step 1 Check whether the storage pool is faulty or offline. If the storage pool is faulty or offine, disable the snapshot again when the storage pool alarm cleared. If the storage pool is normal, and the alarm still persists, go to step 2.
Step 2 Check whether the communication between controllers is abnormal. If the communication between controllers is abnormal, disable the snapshot again when the communication between controllers is normal, If the alarm still persists, go to step 3.
Step 3 If the fault is not rectified, contact technical support engineers for assistance.
Target | Huawei.ISM.Management.Pack.huawei.Class.Device | ||
Category | None | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | Error | ||
Alert Priority | High | ||
Remotable | True | ||
Alert Message |
|
ID | Module Type | TypeId | RunAs |
---|---|---|---|
DS1 | DataSource | MPAuthor.ExpressionFilter.ScheduledProbeDS | Default |
filterCD0x000E02050003 | ConditionDetection | System.ExpressionFilter | Default |
Alert | WriteAction | System.Health.GenerateAlert | Default |
<Rule ID="Huawei.ISM.Management.Pack.Huawei.ISM.Management.Pack.huawei.ism.rule.trap.0x000E02050003" Target="Huawei.ISM.Management.Pack.huawei.Class.Device" Enabled="true" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">
<Category>None</Category>
<DataSources>
<DataSource ID="DS1" TypeID="MPAuthor.ExpressionFilter.ScheduledProbeDS">
<Interval>14400</Interval>
<SyncTime/>
</DataSource>
</DataSources>
<ConditionDetection ID="filterCD0x000E02050003" TypeID="System!System.ExpressionFilter">
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='alarmId']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value>60163424259</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='category']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value>1</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</ConditionDetection>
<WriteActions>
<WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">
<Priority>2</Priority>
<Severity>2</Severity>
<AlertMessageId>$MPElement[Name="Huawei.ISM.Management.Pack.Huawei.ISM.Management.Pack.huawei.ism.rule.trap.0x000E02050003.AlertMessage"]$</AlertMessageId>
<AlertParameters>
<AlertParameter1>$Data/Property[@Name='detail']$</AlertParameter1>
<AlertParameter2>$Data/Property[@Name='alarmId']$</AlertParameter2>
</AlertParameters>
<Custom1>$Data/Property[@Name='eventSequence']$</Custom1>
</WriteAction>
</WriteActions>
</Rule>