0x000F01050016
Step1 Check whether alarms are generated for fan modules of the switch.
1.1 If yes, handle alarms with recommended actions. If alarm Switch Temperature Exceeds the Upper Limit persists=>[Step2].
1.2 If no=>[Step2].
Step2 Check whether heat dissipation channels are blocked.
2.1 If yes, clear the heat dissipation channels. If alarm Switch Temperature Exceeds the Upper Limit persists=>[Step3].
2.2 If no=>[Step3].
Step3 Check whether the ambient temperature is too high.
3.1 If yes, lower the existing air conditioners temperature or add more air conditioners. If alarm Switch Temperature Exceeds the Upper Limit persists=>[Step4].
3.2 If no=>[Step4].
Step4 Collect related information and contact technical support engineers.
Target | Huawei.ISM.Management.Pack.huawei.Class.Device | ||
Category | None | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | Error | ||
Alert Priority | High | ||
Remotable | True | ||
Alert Message |
|
ID | Module Type | TypeId | RunAs |
---|---|---|---|
DS1 | DataSource | MPAuthor.ExpressionFilter.ScheduledProbeDS | Default |
filterCD0x000F01050016 | ConditionDetection | System.ExpressionFilter | Default |
Alert | WriteAction | System.Health.GenerateAlert | Default |
<Rule ID="Huawei.ISM.Management.Pack.Huawei.ISM.Management.Pack.huawei.ism.rule.trap.0x000F01050016" Target="Huawei.ISM.Management.Pack.huawei.Class.Device" Enabled="true" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">
<Category>None</Category>
<DataSources>
<DataSource ID="DS1" TypeID="MPAuthor.ExpressionFilter.ScheduledProbeDS">
<Interval>14400</Interval>
<SyncTime/>
</DataSource>
</DataSources>
<ConditionDetection ID="filterCD0x000F01050016" TypeID="System!System.ExpressionFilter">
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='alarmId']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value>64441614358</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">Property[@Name='category']</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value>1</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</ConditionDetection>
<WriteActions>
<WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">
<Priority>2</Priority>
<Severity>2</Severity>
<AlertMessageId>$MPElement[Name="Huawei.ISM.Management.Pack.Huawei.ISM.Management.Pack.huawei.ism.rule.trap.0x000F01050016.AlertMessage"]$</AlertMessageId>
<AlertParameters>
<AlertParameter1>$Data/Property[@Name='detail']$</AlertParameter1>
<AlertParameter2>$Data/Property[@Name='alarmId']$</AlertParameter2>
</AlertParameters>
<Custom1>$Data/Property[@Name='eventSequence']$</Custom1>
</WriteAction>
</WriteActions>
</Rule>