Home
  •  

Port negotiated rate is smaller than the allowed maximum.

Huawei.ISM.Management.Pack.Huawei.ISM.Management.Pack.huawei.ism.rule.trap.0x000F0108001D (Rule)

Knowledge Base article:

Alert ID

0x000F0108001D

Resolutions

Step1 Check whether the speed supported by the network ports peer port is smaller than that of the network port.

1.1 If yes, ignore this alarm.

1.2 If no=>[Step2].

Step2 Check expansion cables.

2.1 If any expansion cable is removed, reinsert it. If the alarm persists=>[2.2].

2.2 Replace the expansion cable. If the alarm persists=>[Step3].

Step3 Check whether any optical module is installed.

3.1 If no=>[Step4].

3.2. If yes, replace the optical modules on the network port and its peer port. If the alarm persists=>[3.3].

3.3 Replace the interface modules where the network port and its peer port reside. If the alarm persists=>[Step4].

Step4 Collect related information and contact technical support engineers.

Element properties:

TargetHuawei.ISM.Management.Pack.huawei.Class.Device
CategoryNone
EnabledTrue
Alert GenerateTrue
Alert SeverityWarning
Alert PriorityNormal
RemotableTrue
Alert Message
Port negotiated rate is smaller than the allowed maximum.
{0}

Member Modules:

ID Module Type TypeId RunAs 
DS1 DataSource MPAuthor.ExpressionFilter.ScheduledProbeDS Default
filterCD0x000F0108001D ConditionDetection System.ExpressionFilter Default
Alert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="Huawei.ISM.Management.Pack.Huawei.ISM.Management.Pack.huawei.ism.rule.trap.0x000F0108001D" Target="Huawei.ISM.Management.Pack.huawei.Class.Device" Enabled="true" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">

  <Category>None</Category>

  <DataSources>

    <DataSource ID="DS1" TypeID="MPAuthor.ExpressionFilter.ScheduledProbeDS">

      <Interval>14400</Interval>

      <SyncTime/>

    </DataSource>

  </DataSources>

  <ConditionDetection ID="filterCD0x000F0108001D" TypeID="System!System.ExpressionFilter">

    <Expression>

      <And>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="String">Property[@Name='alarmId']</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value>64441810973</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="String">Property[@Name='category']</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value>1</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

      </And>

    </Expression>

  </ConditionDetection>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>1</Priority>

      <Severity>1</Severity>

      <AlertMessageId>$MPElement[Name="Huawei.ISM.Management.Pack.Huawei.ISM.Management.Pack.huawei.ism.rule.trap.0x000F0108001D.AlertMessage"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Data/Property[@Name='detail']$</AlertParameter1>

        <AlertParameter2>$Data/Property[@Name='alarmId']$</AlertParameter2>

      </AlertParameters>

      <Custom1>$Data/Property[@Name='eventSequence']$</Custom1>

    </WriteAction>

  </WriteActions>

</Rule>