This monitor watches for a BladeCenter event that indicates that the specified blade server has a voltage problem.
You can disable this monitor through the Operations Manager's Operations Console. See the "Disable monitors" topic in the Operations Manager's Operations User's Guide for more information.
The BladeCenter event is delivered to this monitor asynchronously. There is no monitoring interval to configure for this monitor.
The BladeCenter event is delivered to this monitor from the AMM (Advanced Management Module) of the BladeCenter via the SNMP (Simple Network Management Protocol) protocol. It also goes through the BladeCenter runtime support of the Hardware Management Pack installed on the management server that was designated to manage the BladeCenter during the Network Device Discovery process.
For the proper BladeCenter AMM SNMP settings that are required for the Hardware Management Pack to discover BladeCenter modules and report events, consult the Hardware Management Pack's User's Guide.
When the specified blade server has a voltage problem, the BladeCenter's AMM generates a hardware event. The health state of this monitor is then set to the Critical or Warning state.
For a particular incident, review the history in the State Changes tab. Consult the relevant hardware knowledge articles listed below, keeping in mind the relevant event data.
The relevant Lenovo hardware knowledge articles are available on a system with the Lenovo Hardware Management Pack package installed.
Voltage regulator "Instance Number" fault
Blade voltage outside of recommended range
Voltage regulator "Instance Number" over recommended voltage
Voltage regulator "Instance Number" under recommended voltage
Blade 5V over recommended voltage
Blade 5V under recommended voltage
Blade 12V over recommended voltage
Blade 12V under recommended voltage
Blade 1.25V over recommended voltage
Blade 1.25V under recommended voltage
Blade 1.2V over recommended voltage
Blade 1.2V under recommended voltage
Blade 2.5V over recommended voltage
Blade 2.5V under recommended voltage
Blade 3.3V over recommended voltage
Blade 3.3V under recommended voltage
Blade 5V over recommended voltage
Blade 5V under recommended voltage
Blade 1.6V over recommended voltage
Blade 1.6V under recommended voltage
Blade -5V over recommended voltage
Blade -5V under recommended voltage
Blade 1.5V over recommended voltage
Blade 1.5V under recommended voltage
Blade 1.8V over recommended voltage
Blade 1.8V under recommended voltage
1.2V standby over recommended voltage
1.2V standby under recommended voltage
3.3V standby over recommended voltage
3.3V standby under recommended voltage
2.5V standby over recommended voltage
2.5V standby under recommended voltage
5V standby over recommended voltage
5V standby under recommended voltage
12V standby over recommended voltage
12V standby under recommended voltage
1.5V standby over recommended voltage
1.5V standby under recommended voltage
1.8V standby over recommended voltage
1.8V standby under recommended voltage
The "Instance Number" can be found as the numeric part of the name/description for an alert or event, and it reflects the number of the bay/module. For instance, 'Voltage regulator "Instance Number" fault' could actually mean "Voltage regulator 01 fault".
Review the relevant Lenovo hardware knowledge articles listed above for information about how to resolve the hardware problem for a particular incident.
The monitor generates an alert when its health state changes to either Critical or Warning. After the voltage problem is resolved, manually reset the health state of this monitor. See the "Reset Health" topic in the Operations Manager's Operations User's Guide for more information. Any outstanding corresponding alerts will be automatically closed when the health state of this monitor returns to the Healthy state.
For the proper AMM SNMP settings needed for the Hardware Management Pack, see the "Configuring BladeCenter SNMP settings" topic in the IBM Hardware Management Pack for Microsoft System Center Operations Manager Installation and User's Guide.
Links to Lenovo resources
Target | IBM.BladeCenter.BladeModule | ||
Parent Monitor | System.Health.ConfigurationState | ||
Category | Custom | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | MatchMonitorHealth | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | IBM.BladeCenter.SNMPTrap.3StateMonitorTypeForModule | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="IBM.BladeCenter.BladeVoltage.Failed" Accessibility="Public" Enabled="true" Target="IBM.BladeCenter.BladeModule" ParentMonitorID="Health!System.Health.ConfigurationState" Remotable="true" Priority="Normal" TypeID="IBM.BladeCenter.SNMPTrap.3StateMonitorTypeForModule" ConfirmDelivery="false">
<Category>Custom</Category>
<AlertSettings AlertMessage="IBM.BladeCenter.BladeVoltage.Failed.AlertMessageID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Data/Context/SnmpVarBinds/SnmpVarBind[OID='.1.3.6.1.4.1.2.6.158.3.1.1.8']/Value$</AlertParameter1>
<AlertParameter2>$Data/Context/SnmpVarBinds/SnmpVarBind[OID='.1.3.6.1.4.1.2.6.158.3.1.1.14']/Value$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="ComponentSuccess" MonitorTypeStateID="SuccessEventRaised" HealthState="Success"/>
<OperationalState ID="ComponentWarning" MonitorTypeStateID="WarningEventRaised" HealthState="Warning"/>
<OperationalState ID="ComponentError" MonitorTypeStateID="ErrorEventRaised" HealthState="Error"/>
</OperationalStates>
<Configuration>
<!--2012.08.10 Ling Mo add 100881664 and 168000514-->
<EventIds>111|7130854[56]|7130931[34]|7146700[89]|7146701[012]|100881664|100882432|100889856|100890624|13422284[89]|13422387[23]|134419584|134420608|134427776|134428800|134436096|134436864|134452352|134453376|134468864|134469632|134484992|134486016|134722560|134723584|167816194|167820290|167955458|167959554|167971842|167975938|167988226|167992322|167996418|168000514|168037378|168041474|168274946|168279042</EventIds>
</Configuration>
</UnitMonitor>