Alertmonitor für Lenovo BladeCenter KVM Inhaberkontrolle Fehler
This monitor watches for a BladeCenter event that indicates that a request to release and/or acquire the KVM has failed or has been denied.
You can disable this monitor through the Operations Manager's Operations Console. See the "Disable monitors" topic in the Operations Manager's Operations User's Guide for more information.
The BladeCenter event is delivered to this monitor asynchronously. There is no monitoring interval to configure for this monitor.
The BladeCenter event is delivered to this monitor from the AMM (Advanced Management Module) of the BladeCenter via the SNMP (Simple Network Management Protocol) protocol. It also goes through the BladeCenter runtime support of the Hardware Management Pack installed on the management server that was designated to manage the BladeCenter during the Network Device Discovery process.
For the proper BladeCenter AMM SNMP settings that are required for the Hardware Management Pack to discover BladeCenter modules and report events, consult the Hardware Management Pack's User's Guide.
When the request to release and/or acquire the KVM has failed or has been denied by the Management Module, the BladeCenter's AMM generates a hardware event. The health state of this monitor is then set to the Critical or Warning state.
For a particular incident, review the history in the State Changes tab. Consult the relevant hardware knowledge articles listed below, keeping in mind the relevant event data.
The relevant Lenovo hardware knowledge articles are available on a system with the Lenovo Hardware Management Pack package installed.
Request to release KVM failed - KVM seized by Management Module
Request to acquire KVM denied by Management Module
Review the relevant Lenovo hardware knowledge articles listed above for information about how to resolve the hardware problem for a particular incident.
When the request to release and/or acquire the KVM has failed or has been denied, the monitor generates an alert when its health state changes to either Critical or Warning. After the KVM problem has been resolved, manually reset the health state of this monitor. See the "Reset Health" topic in the Operations Manager's Operations User's Guide for more information. Any outstanding corresponding alerts will be automatically closed when the health state of this monitor returns to the Healthy state.
For the proper AMM SNMP settings needed for the Hardware Management Pack, see the "Configuring BladeCenter SNMP settings" topic in the IBM Hardware Management Pack for Microsoft System Center Operations Manager Installation and User's Guide.
Links to Lenovo resources
Target | IBM.BladeCenter | ||
Parent Monitor | System.Health.ConfigurationState | ||
Category | Custom | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | MatchMonitorHealth | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | IBM.BladeCenter.SNMPTrap.3StateMonitorTypeForBladeCenter | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="IBM.BladeCenter.KVMOwnership.Failed" Accessibility="Public" Enabled="true" Target="IBM.BladeCenter" ParentMonitorID="Health!System.Health.ConfigurationState" Remotable="true" Priority="Normal" TypeID="IBM.BladeCenter.SNMPTrap.3StateMonitorTypeForBladeCenter" ConfirmDelivery="false">
<Category>Custom</Category>
<AlertSettings AlertMessage="IBM.BladeCenter.KVMOwnership.Failed.AlertMessageID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Data/Context/SnmpVarBinds/SnmpVarBind[OID='1.3.6.1.4.1.2.6.158.3.1.1.8'][1]/Value$</AlertParameter1>
<AlertParameter2>$Data/Context/SnmpVarBinds/SnmpVarBind[OID='1.3.6.1.4.1.2.6.158.3.1.1.14'][1]/Value$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="ComponentSuccess" MonitorTypeStateID="SuccessEventRaised" HealthState="Success"/>
<OperationalState ID="ComponentWarning" MonitorTypeStateID="WarningEventRaised" HealthState="Warning"/>
<OperationalState ID="ComponentError" MonitorTypeStateID="ErrorEventRaised" HealthState="Error"/>
</OperationalStates>
<Configuration>
<EventIds>100671490|100671492</EventIds>
</Configuration>
</UnitMonitor>