This monitor watches for a CMM event that indicates Chassis VPD is not valid.
You can disable this monitor through the Operations Manager's Operations Console. See the "Disable monitors" topic in the Operations Manager's Operations User's Guide for more information.
The Flex System event is delivered to this monitor asynchronously. There is no monitoring interval to configure for this monitor.
The Flex System event is delivered to this monitor from the CMM (Chassis Management Module) of the Chassis via the SNMP (Simple Network Management Protocol) protocol. It also goes through the Flex System runtime support of the Hardware Management Pack installed on the management server that was designated to manage the PureFlex System during the Network Device Discovery process.
For the proper Flex System CMM SNMP settings that are required for the Hardware Management Pack to discover Flex System modules and report events, consult the Hardware Management Pack's User's Guide.
The vital product data (VPD) on the rear LED card is not valid.
For a particular incident, review the history in the State Changes tab. Consult the relevant hardware knowledge articles listed below, keeping in mind the relevant event data.
The relevant Lenovo hardware knowledge articles are available on a system with the Lenovo Hardware Management Pack package installed.
Chassis VPD is not valid
Review the relevant Lenovo hardware knowledge articles listed above for information about how to resolve the hardware problem for a particular incident.
The monitor generates an alert when its health state changes to either Critical or Warning. After the system is running again normally, the health state will be automatically restored to the Healthy state. Any outstanding corresponding alerts will also be automatically closed.
For the proper CMM SNMP settings needed for the Hardware Management Pack, see the "Configuring CMM SNMP settings" topic in the IBM Hardware Management Pack for Microsoft System Center Operations Manager Installation and User's Guide.
Links to Lenovo resources
Target | IBM.FlexSystem.Chassis | ||
Parent Monitor | System.Health.AvailabilityState | ||
Category | Custom | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | MatchMonitorHealth | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | IBM.FlexSystem.SNMPTrap.3StateMonitorTypeForChassis | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="IBM.FlexSystem.ChassisVPDInvalid" Accessibility="Public" Enabled="true" Target="IBM.FlexSystem.Chassis" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="IBM.FlexSystem.SNMPTrap.3StateMonitorTypeForChassis" ConfirmDelivery="false">
<Category>Custom</Category>
<AlertSettings AlertMessage="IBM.FlexSystem.ChassisVPDInvalid.AlertMessageID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Data/Context/SnmpVarBinds/SnmpVarBind[OID='1.3.6.1.4.1.2.6.158.3.1.1.8'][1]/Value$</AlertParameter1>
<AlertParameter2>$Data/Context/SnmpVarBinds/SnmpVarBind[OID='1.3.6.1.4.1.2.6.158.3.1.1.14'][1]/Value$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="ComponentSuccess" MonitorTypeStateID="SuccessEventRaised" HealthState="Success"/>
<OperationalState ID="ComponentWarning" MonitorTypeStateID="WarningEventRaised" HealthState="Warning"/>
<OperationalState ID="ComponentError" MonitorTypeStateID="ErrorEventRaised" HealthState="Error"/>
</OperationalStates>
<Configuration>
<EventIds>1074003968</EventIds>
</Configuration>
</UnitMonitor>