Alerts when IBM system temperature ill conditions
This monitor watches for a hardware event that indicates that a specific enclosure temperature sensor on the system detects a temperature level above the predefined Healthy threshold.
You can disable this monitor through the Operations Manager's Operations Console. See the "Disable monitors" topic in the Operations Manager's Operations User's Guide for more information.
Hardware-platform-specific events, such as this one, are delivered asynchronously to this monitor. There is no monitoring interval to configure for this monitor.
The hardware event with this monitor is available only on an IBM system with the appropriate hardware sensors and with a management controller (also called a Service Processor), such as Integrated Management Module (IMM), Baseboard Management Controller (BMC), Remote Supervisor Adapter (RSA), or an equivalent management controller on an older IBM system.
This monitor depends on hardware instrumentation software, namely the IBM Director Platform Agent (also called Core Services) and the Intelligent Platform Management Interface (IPMI) driver stack. This software raises the hardware event to the WMI level, so that the monitor can be notified. On certain configurations, the RSA daemon can be used in place of, or in parallel with, the IPMI driver stack. See the "Additional Information" section below for more information about IBM Director Platform Agent, the IPMI driver stack and the RSA daemon.
When a specific enclosure temperature sensor detects a temperature above the Healthy threshold that the manufacturer defines, a hardware event is generated. The health state of this monitor is then set to the Critical or Warning state.
For a particular incident, review the history in the State Changes tab. Consult the relevant hardware knowledge articles listed below, keeping in mind the relevant event data.
The relevant IBM hardware knowledge articles are available on a system with the IBM Hardware Management Pack package installed.
Enclosure temperature is out of range
Review the relevant IBM hardware knowledge articles listed above for information about how to resolve the hardware problem for a particular incident.
The monitor generates an alert when its health state changes to either Critical or Warning. After the specific enclosure temperature sensor detects the temperature level within the range of the predefined healthy threshold, the health state will be automatically restored to the Healthy state. Any outstanding corresponding alerts will also be automatically closed.
IBM Director Platform Agent
IMM, BMC and IPMI driver stack
IBM RSA-II and the RSA-II daemon
Links to IBM resources
Target | IBM.SystemX.TemperatureSensor | ||
Parent Monitor | System.Health.PerformanceState | ||
Category | Custom | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | MatchMonitorHealth | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | IBM.SingleClass.HWInstanceMonitorType.AutoReset3State | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="IBM.SystemX.TemperatureSensor.High" Accessibility="Public" Enabled="true" Target="IBM.SystemX.TemperatureSensor" ParentMonitorID="Health!System.Health.PerformanceState" Remotable="true" Priority="Normal" TypeID="IBM.SingleClass.HWInstanceMonitorType.AutoReset3State" ConfirmDelivery="false">
<Category>Custom</Category>
<AlertSettings AlertMessage="IBM.SystemX.TemperatureSensor.High.AlertMessageResourceID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Data/Context/Property[@Name="Description"]$</AlertParameter1>
<AlertParameter2>$Data/Context/Property[@Name="__CLASS"]$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="Critical" MonitorTypeStateID="ErrorEventRaised" HealthState="Error"/>
<OperationalState ID="Warning" MonitorTypeStateID="WarningEventRaised" HealthState="Warning"/>
<OperationalState ID="Success" MonitorTypeStateID="HealthyEventRaised" HealthState="Success"/>
</OperationalStates>
<Configuration>
<NameSpace>root\ibmsd</NameSpace>
<Query>
SELECT __Class, AlertingManagedElement, Description, EventID, PerceivedSeverity From CIM_AlertIndication
</Query>
<CIMAlertClassName>IBMPSG_TemperatureEvent</CIMAlertClassName>
<!--
<ErrWarningSpecialFilter>exceeded</ErrWarningSpecialFilter>
<SuccessSpecialFilter>normal</SuccessSpecialFilter>
-->
<PollInterval>10</PollInterval>
<WinEventFiltering>$Target/Host/Host/Property[Type="IBM.SystemX.Platform"]/ibmInternalWinEventFiltering$</WinEventFiltering>
<Licensed>$Target/Host/Host/Property[Type="IBM.SystemX.Platform"]/Licensed$</Licensed>
</Configuration>
</UnitMonitor>