Home
  •  

IPCP negotiation failure

IPCP_negotiation_failure_1_Rule (Rule)

Knowledge Base article:

Management Pack

Summary

The Routing and Remote Access service encountered an error in assigning an IP address to dial-in clients during IP Control Protocol (IPCP) negotiation.

 

Causes

1.     The DHCP server couldn’t be contacted.

2.     The RRAS service IP address pool ran out of addresses.

 

Resolutions

1.     Verify the network connection between the RRAS server and DHCP server.

2.     Verify whether the IP address pool on the RRAS server is out of addresses and determine if you need to add more addresses to the pool.

 

Sample Event

Sample Event #1: A connection has been established on port %1 using interface %2, but no IP address was obtained.
Sample Event #2: A connection has been established on port %1 using interface %2, but the remote side got no IP address.
Sample Event #3: No IP address is available to hand out to the dial-in client.
Sample Event #4: Unable to contact a DHCP server. The Automatic Private IP Address %1 will be assigned to dial-in clients. Clients may be unable to access resources onthe network.

 

© 2004 Microsoft Corporation, all rights reserved.

 

Element properties:

TargetMicrosoft.Windows.Server.RRAS.2008.Server
CategoryEventCollection
EnabledTrue
Event SourceRemoteAccess
Alert GenerateFalse
RemotableTrue
Event LogSystem

Member Modules:

ID Module Type TypeId RunAs 
DS DataSource Microsoft.Windows.EventProvider Default
WriteToDB WriteAction Microsoft.SystemCenter.CollectEvent Default

Source Code:

<Rule ID="IPCP_negotiation_failure_1_Rule" Enabled="true" Target="Microsoft.Windows.Server.RRAS.2008.Server" ConfirmDelivery="true" Remotable="true" Priority="Normal" DiscardLevel="100">

  <Category>EventCollection</Category>

  <DataSources>

    <DataSource ID="DS" TypeID="Windows!Microsoft.Windows.EventProvider">

      <ComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>

      <LogName>System</LogName>

      <Expression>

        <And>

          <Expression>

            <RegExExpression>

              <ValueExpression>

                <XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>

              </ValueExpression>

              <Operator>MatchesRegularExpression</Operator>

              <Pattern>^(20165|20166|20167|20169)$</Pattern>

            </RegExExpression>

          </Expression>

          <Expression>

            <SimpleExpression>

              <ValueExpression>

                <XPathQuery Type="String">PublisherName</XPathQuery>

              </ValueExpression>

              <Operator>Equal</Operator>

              <ValueExpression>

                <Value Type="String">RemoteAccess</Value>

              </ValueExpression>

            </SimpleExpression>

          </Expression>

        </And>

      </Expression>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="WriteToDB" TypeID="SC!Microsoft.SystemCenter.CollectEvent"/>

  </WriteActions>

</Rule>