This monitor catches Xian events that notifies when the Outgoing IP packets if has changed its state.
Number of outgoing IP packets is over threshold.
The number of outgoing packets is above the maximum threshold configured in Xian Network Manager 2012.
Sub-optimal configuration that causes slow response, buffering, congestion, and connection timeouts in outgoing processes; the router is oversubscribed; there is low CPU availability; or low memory availability.
Perform packet debugging or run a packet analyzer with extreme caution if the CPU utilization is already high. Examine the output of the 'show interfaces switching' command to see which interface is burdened with traffic. Tune the router’s performance to minimize the time a packet remains in the router. If the router is over-used, try to distribute the load among other routers or purchase a high-end router. Improve CPU and memory availability to avoid packets that require processor attention to be dropped.
Monitors the outgoing IP traffic in packets on a given device interface, detecting when the average traffic is above normal values.
Target | Jalasoft.Xian.Common.Elements.ThirdParty.Cisco.JsXCiscoRouterSnmpInterfaceElement | ||
Parent Monitor | System.Health.PerformanceState | ||
Algorithm | WorstOf | ||
Category | StateCollection | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | MatchMonitorHealth | ||
Alert Priority | Low | ||
Alert Auto Resolve | True | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
|
<AggregateMonitor ID="Jalasoft.Xian.SmartManagementPacks.CiscoRouters.OutgoingIPPackets.1.1" Accessibility="Public" Enabled="true" Target="ThirdParty_Cisco!Jalasoft.Xian.Common.Elements.ThirdParty.Cisco.JsXCiscoRouterSnmpInterfaceElement" ParentMonitorID="SystemHealth!System.Health.PerformanceState" Remotable="true" Priority="Normal">
<Category>StateCollection</Category>
<AlertSettings AlertMessage="OutgoingIPPackets_AlertMessage">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Low</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Data/Context/Params/Param[3]$</AlertParameter1>
</AlertParameters>
</AlertSettings>
<Algorithm>WorstOf</Algorithm>
</AggregateMonitor>