HP MSA2000 Error Event 363

MSA.Rule.Event.System.Error.363 (Rule)

When the Management Controller is restarted, firmware versions that are currently installed are compared against those in the bundle that was most recently installed.

Knowledge Base article:

Summary

Error Event 363.

Causes

When the Management Controller is restarted, firmware versions that are currently installed are compared against those in the bundle that was most recently installed. When firmware is updated, it is important that all components are successfully updated or the system may not work correctly. Components checked include the CPLD, Expander Controller (EC), Storage Controller (SC), and MC.

Resolutions

Reinstall the firmware bundle.

Element properties:

Target

MSA.System

Category

Alert

Enabled

True

Alert Generate

True

Alert Severity

Error

Alert Priority

Low

Remotable

False

Alert Message

When the Management Controller is restarted, firmware versions that are currently installed are compared against those in the bundle that was most recently installed.

System Name: {0}
Primary IP Address: {1}
Secondary IP Address: {2}
Severity: {3}
Event: {4}

Member Modules:

ID	Module Type	TypeId	RunAs
Event	DataSource	MSA.DataSource.Event.System	Default
EventFilter	ConditionDetection	MSA.ConditionDetection.Filter.Event	Default
Alert	WriteAction	System.Health.GenerateAlert	Default

Source Code:

<Rule ID="MSA.Rule.Event.System.Error.363" Enabled="true" Target="MSA.System" ConfirmDelivery="true" Remotable="false" Priority="Normal" DiscardLevel="100">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="Event" TypeID="MSA.DataSource.Event.System"/>

  </DataSources>

  <ConditionDetection ID="EventFilter" TypeID="MSA.ConditionDetection.Filter.Event">

    <EventCode>363</EventCode>

    <SeverityNumeric>1</SeverityNumeric>

  </ConditionDetection>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>0</Priority>

      <Severity>2</Severity>

      <AlertMessageId>$MPElement[Name="AlertMessageID7c774b4c766643049eee015d67054247"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Target/Property[Type="System!System.Entity"]/DisplayName$</AlertParameter1>

        <AlertParameter2>$Target/Property[Type="MSA.System"]/PrimaryIP$</AlertParameter2>

        <AlertParameter3>$Target/Property[Type="MSA.System"]/SecondaryIP$</AlertParameter3>

        <AlertParameter4>$Data/Property[@Name='severity']$</AlertParameter4>

        <AlertParameter5>$Data/Property[@Name='message']$</AlertParameter5>

      </AlertParameters>

    </WriteAction>

  </WriteActions>

</Rule>