Home
  •  

HP MSA2000 Warning Event 232

MSA.Rule.Event.System.Warning.232 (Rule)

The maximum number of enclosures allowed for the current configuration has been exceeded.

Knowledge Base article:

Summary

Warning Event 232.

Causes

The maximum number of enclosures allowed for the current configuration has been exceeded.

The platform does not support the number of enclosures that are configured. The enclosure indicated by this event has been removed from the configuration.

Resolutions

Reconfigure the system.

Element properties:

TargetMSA.System
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityWarning
Alert PriorityLow
RemotableFalse
Alert Message
The maximum number of enclosures allowed for the current configuration has been exceeded.

System Name: {0}
Primary IP Address: {1}
Secondary IP Address: {2}
Severity: {3}
Event: {4}

Member Modules:

ID Module Type TypeId RunAs 
Event DataSource MSA.DataSource.Event.System Default
EventFilter ConditionDetection MSA.ConditionDetection.Filter.Event Default
Alert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="MSA.Rule.Event.System.Warning.232" Enabled="true" Target="MSA.System" ConfirmDelivery="true" Remotable="false" Priority="Normal" DiscardLevel="100">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="Event" TypeID="MSA.DataSource.Event.System"/>

  </DataSources>

  <ConditionDetection ID="EventFilter" TypeID="MSA.ConditionDetection.Filter.Event">

    <EventCode>232</EventCode>

    <SeverityNumeric>2</SeverityNumeric>

  </ConditionDetection>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>0</Priority>

      <Severity>1</Severity>

      <AlertMessageId>$MPElement[Name="AlertMessageID93e458b7435c4b1b83d0d75396c52cb5"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Target/Property[Type="System!System.Entity"]/DisplayName$</AlertParameter1>

        <AlertParameter2>$Target/Property[Type="MSA.System"]/PrimaryIP$</AlertParameter2>

        <AlertParameter3>$Target/Property[Type="MSA.System"]/SecondaryIP$</AlertParameter3>

        <AlertParameter4>$Data/Property[@Name='severity']$</AlertParameter4>

        <AlertParameter5>$Data/Property[@Name='message']$</AlertParameter5>

      </AlertParameters>

    </WriteAction>

  </WriteActions>

</Rule>