HP MSA2000 Warning Event 358

MSA.Rule.Event.System.Warning.358 (Rule)

Some, but not all, PHYs are down for the indicated disk channel.

Knowledge Base article:

Summary

Warning Event 358.

Causes

Some, but not all, PHYs are down for the indicated disk channel.

Resolutions

Monitor the log to see whether the condition persists.
If the condition doesn't persist (that is, if event 359 has been logged for the indicated channel), no further action is required.
If the condition persists, this indicates a hardware problem in one of the controller modules or in the controller enclosure midplane. For help identifying which FRU to replace, see the CLI help for the show events command.

External

These and other HP documents can be found on the Software Support/Documentation DVD shipped with your product or at http://www.hp.com/go/p2000/manuals. For links to additional information about your product, see http://www.hp.com/go/p2000 or http://www.hp.com/go/msa. For product support and to download drivers, firmware, and software, see http://www.hp.com/support.

Element properties:

Target

MSA.System

Category

Alert

Enabled

True

Alert Generate

True

Alert Severity

Warning

Alert Priority

Low

Remotable

False

Alert Message

Some, but not all, PHYs are down for the indicated disk channel.

System Name: {0}
Primary IP Address: {1}
Secondary IP Address: {2}
Severity: {3}
Event: {4}

Member Modules:

ID	Module Type	TypeId	RunAs
Event	DataSource	MSA.DataSource.Event.System	Default
EventFilter	ConditionDetection	MSA.ConditionDetection.Filter.Event	Default
Alert	WriteAction	System.Health.GenerateAlert	Default

Source Code:

<Rule ID="MSA.Rule.Event.System.Warning.358" Enabled="true" Target="MSA.System" ConfirmDelivery="true" Remotable="false" Priority="Normal" DiscardLevel="100">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="Event" TypeID="MSA.DataSource.Event.System"/>

  </DataSources>

  <ConditionDetection ID="EventFilter" TypeID="MSA.ConditionDetection.Filter.Event">

    <EventCode>358</EventCode>

    <SeverityNumeric>2</SeverityNumeric>

  </ConditionDetection>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>0</Priority>

      <Severity>1</Severity>

      <AlertMessageId>$MPElement[Name="AlertMessageIDd8740e707dc44bfd8b0242c380deb0f8"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Target/Property[Type="System!System.Entity"]/DisplayName$</AlertParameter1>

        <AlertParameter2>$Target/Property[Type="MSA.System"]/PrimaryIP$</AlertParameter2>

        <AlertParameter3>$Target/Property[Type="MSA.System"]/SecondaryIP$</AlertParameter3>

        <AlertParameter4>$Data/Property[@Name='severity']$</AlertParameter4>

        <AlertParameter5>$Data/Property[@Name='message']$</AlertParameter5>

      </AlertParameters>

    </WriteAction>

  </WriteActions>

</Rule>