Home
  •  

HP MSA2000 Warning Event 443

MSA.Rule.Event.System.Warning.443 (Rule)

A firmware version mismatch has been detected in an MSA70 or D2700 enclosure.

Knowledge Base article:

Summary

Warning Event 443.

Causes

A firmware version mismatch has been detected in an MSA70 or D2700 enclosure. The enclosure should be updated to the latest supported version of firmware as soon as possible.

Resolutions

In the enclosure, all FRUs must be at a combined proper firmware recipe. The two expansion modules must be at equal firmware versions. Any replaced MSA70 FRUs might have older firmware that does not match an internally defined recipe. Update the indicated enclosure to the latest firmware version to ensure all FRUs are at the proper firmware level.

Element properties:

TargetMSA.System
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityWarning
Alert PriorityLow
RemotableFalse
Alert Message
A firmware version mismatch has been detected in an MSA70 or D2700 enclosure.

System Name: {0}
Primary IP Address: {1}
Secondary IP Address: {2}
Severity: {3}
Event: {4}

Member Modules:

ID Module Type TypeId RunAs 
Event DataSource MSA.DataSource.Event.System Default
EventFilter ConditionDetection MSA.ConditionDetection.Filter.Event Default
Alert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="MSA.Rule.Event.System.Warning.443" Enabled="true" Target="MSA.System" ConfirmDelivery="true" Remotable="false" Priority="Normal" DiscardLevel="100">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="Event" TypeID="MSA.DataSource.Event.System"/>

  </DataSources>

  <ConditionDetection ID="EventFilter" TypeID="MSA.ConditionDetection.Filter.Event">

    <EventCode>443</EventCode>

    <SeverityNumeric>2</SeverityNumeric>

  </ConditionDetection>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>0</Priority>

      <Severity>1</Severity>

      <AlertMessageId>$MPElement[Name="AlertMessageID6e3e611764e34f96a427b2b5e5f82c08"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Target/Property[Type="System!System.Entity"]/DisplayName$</AlertParameter1>

        <AlertParameter2>$Target/Property[Type="MSA.System"]/PrimaryIP$</AlertParameter2>

        <AlertParameter3>$Target/Property[Type="MSA.System"]/SecondaryIP$</AlertParameter3>

        <AlertParameter4>$Data/Property[@Name='severity']$</AlertParameter4>

        <AlertParameter5>$Data/Property[@Name='message']$</AlertParameter5>

      </AlertParameters>

    </WriteAction>

  </WriteActions>

</Rule>