Home
  •  

HP MSA2000 Warning Event 456

MSA.Rule.Event.System.Warning.456 (Rule)

The system's IQN was generated from the default OUI because the controllers could not read the OUI from the midplane FRU ID data during startup.

Knowledge Base article:

Summary

Warning Event 456.

Causes

The system's IQN was generated from the default OUI because the controllers could not read the OUI from the midplane FRU ID data during startup. If the IQN is wrong for the system's branding, iSCSI hosts might be unable to access the system.

Resolutions

If event 270 with status code 0 is logged at approximately the same time, restart the controllers.

Element properties:

TargetMSA.System
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityWarning
Alert PriorityLow
RemotableFalse
Alert Message
The system's IQN was generated from the default OUI because the controllers could not read the OUI from the midplane FRU ID data during startup.

System Name: {0}
Primary IP Address: {1}
Secondary IP Address: {2}
Severity: {3}
Event: {4}

Member Modules:

ID Module Type TypeId RunAs 
Event DataSource MSA.DataSource.Event.System Default
EventFilter ConditionDetection MSA.ConditionDetection.Filter.Event Default
Alert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="MSA.Rule.Event.System.Warning.456" Enabled="true" Target="MSA.System" ConfirmDelivery="true" Remotable="false" Priority="Normal" DiscardLevel="100">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="Event" TypeID="MSA.DataSource.Event.System"/>

  </DataSources>

  <ConditionDetection ID="EventFilter" TypeID="MSA.ConditionDetection.Filter.Event">

    <EventCode>456</EventCode>

    <SeverityNumeric>2</SeverityNumeric>

  </ConditionDetection>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>0</Priority>

      <Severity>1</Severity>

      <AlertMessageId>$MPElement[Name="AlertMessageIDa04847a56ce24637ae13cbbca60f3616"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Target/Property[Type="System!System.Entity"]/DisplayName$</AlertParameter1>

        <AlertParameter2>$Target/Property[Type="MSA.System"]/PrimaryIP$</AlertParameter2>

        <AlertParameter3>$Target/Property[Type="MSA.System"]/SecondaryIP$</AlertParameter3>

        <AlertParameter4>$Data/Property[@Name='severity']$</AlertParameter4>

        <AlertParameter5>$Data/Property[@Name='message']$</AlertParameter5>

      </AlertParameters>

    </WriteAction>

  </WriteActions>

</Rule>