SUSE Linux Enterprise Server 10 物理ディスクの平均ディスク転送速度 (秒) モニター
(物理ディスクの) 平均転送時間の値が高くなっています。システムのパフォーマンスに悪影響を与える可能性があります。
物理ディスクの平均転送時間は秒単位で測定されます。ボトルネックが発生しているディスクは、システム全体の速度を下げる原因になる可能性があります。
モニターのしきい値は、エージェントへのポーリングで返された値の平均値を基準として分析されます。ここで [サンプル数] パラメーターは、平均値の計算に使用されるサンプルの数を制御します。エージェントによって返される値は、最近 5 分間の平均速度です。
物理ディスクの監視は、既定では無効になっています。監視を有効にするには、[SUSE Linux Enterprise Server 10 物理ディスクの検出] というオブジェクト検出を有効にします。
既定の構成
パラメーター | 既定値 |
しきい値 | 0.05 |
間隔 (秒) | 300 |
サンプル数 | 5 |
上記で定義されたパラメーターの値は、上書きを使用して、すべてのインスタンスまたは特定のインスタンスやグループに対して変更できます。
異常な状態とは、物理ディスクの平均転送時間の値が現在高くなっていることを示します。
この状態の原因には、次のような状況が考えられます。
プロセッサ使用率が高いと、大量のデータ転送を行っているときに、速度が下がる可能性がある。
ハード ディスクの最大持続転送速度に対してハード ドライブ インターフェイスの速度が低すぎると、全体的なパフォーマンスが低下することがある。
使用可能なメモリが少ない場合、仮想メモリ マネージャーにより、さらに多くのページがスワップされるためディスクのアクティビティが増える。
さらに高速のプロセッサにアップグレードするか、プロセッサを追加します。
システムに、システムでサポート可能な最速のハード ドライブが搭載されていることを確認します。
物理メモリを追加します。
このしきい値は必ず特定のストレージ ハードウェア用に適切に設定してください。適切なしきい値は、ディスクを構成するストレージのサブシステムによって異なります。たとえば、"ディスク" は 1 つのスピンドルであることも、大容量ディスク アレイであることもあります。上書きを使用して例外のしきい値を定義し、特定のコンピューターやコンピューター グループ全体に適用できます。
Target | Microsoft.Linux.SLES.10.PhysicalDisk | ||
Parent Monitor | System.Health.PerformanceState | ||
Category | PerformanceHealth | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | Error | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | Microsoft.Unix.WSMan.Performance.Filtered.Average.Threshold.MonitorType | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="Microsoft.Linux.SLES.10.PhysicalDisk.AverageDiskTransferTime.Monitor" Accessibility="Public" Target="Microsoft.Linux.SLES.10.PhysicalDisk" TypeID="Unix!Microsoft.Unix.WSMan.Performance.Filtered.Average.Threshold.MonitorType" Enabled="true" ParentMonitorID="SystemHealth!System.Health.PerformanceState">
<Category>PerformanceHealth</Category>
<AlertSettings AlertMessage="Microsoft.Linux.SLES.10.PhysicalDisk.AverageDiskTransferTime.AlertMessage">
<AlertOnState>Error</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>Error</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Data/Context/Value$</AlertParameter1>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState HealthState="Success" MonitorTypeStateID="UnderThreshold" ID="UnderThreshold"/>
<OperationalState HealthState="Error" MonitorTypeStateID="OverThreshold" ID="OverThreshold"/>
</OperationalStates>
<Configuration>
<TargetSystem>$Target/Host/Property[Type="Unix!Microsoft.Unix.Computer"]/NetworkName$</TargetSystem>
<Uri>http://schemas.microsoft.com/wbem/wscim/1/cim-schema/2/SCX_DiskDriveStatisticalInformation?__cimnamespace=root/scx</Uri>
<Filter/>
<SplitItems>true</SplitItems>
<Interval>300</Interval>
<ObjectName>Physical Disk</ObjectName>
<CounterName>Avg. Disk sec/Transfer</CounterName>
<InstanceName>$Target/Property[Type="Unix!Microsoft.Unix.LogicalDevice"]/DeviceID$</InstanceName>
<InstanceProperty>/DataItem/WsManData/*[local-name(.)='SCX_DiskDriveStatisticalInformation']/*[local-name(.)='Name']</InstanceProperty>
<Value>$Data/WsManData/*[local-name(.)='SCX_DiskDriveStatisticalInformation']/*[local-name(.)='AverageTransferTime']$</Value>
<Threshold>.05</Threshold>
<NumSamples>5</NumSamples>
</Configuration>
</UnitMonitor>