SUSE Linux Enterprise Server 12 作業系統 Total Percent DPC Time 監視
DPC 時間的總百分比 (適用於所有處理器) 偏高。可能會對系統效能造成負面影響。
總 DPC 時間即是所有處理器花在接收和服務延遲程序呼叫 (DPC) 的時間。DPC 是一種插斷,它的執行優先順序比標準插斷低。% DPC Time 是 % Privileged Time 的元件,因為 DPC 是以特殊權限模式執行。如果 [% DPC Time] 持續偏高,表示可能發生處理器瓶頸,或者發生可能致使整體系統效能顯著降低的應用程式或硬體相關問題。
監視閾值是針對輪詢代理程式時傳回的平均值進行分析,其中 [範例數] 參數用於控制平均計算中所含的範例數。代理程式傳回的值是在 1 分鐘的間隔內查詢的 5 個最新值的彙總平均。
預設設定
參數 | 預設值 |
閾值 | 15 |
間隔 (秒) | 300 |
樣本數 | 3 |
您可以使用上列定義的覆寫,變更所有執行個體或特定執行個體或群組的參數值。
發生 DPC 時間值偏高的情況可能是由下列一個或多個原因造成:
處理器瓶頸
軟體相關問題
硬體或裝置驅動程式相關問題
若要確定發生 DPC 時間偏高情況的根本原因,請執行下列程序。觀察花費在處理插斷與 DPC 的處理器時間比例。若要這樣做,請監視下列標準:
Processor\% Processor Time (_Total)
Processor\% Interrupt Time (_Total)
Processor\% DPC Time (_Total)
比較 % Interrupt Time (_Total) 和 % DPC Time (_Total) 標準與 % Processor Time (_Total) 的值。
如果 % Processor Time (_Total) 持續 > 85% 且 % Interrupt Time (_Total) 或 % DPC Time (_Total) > 15%,表示處理器可能是造成效能瓶頸的來源。您可以升級電腦或在電腦上新增處理器來解決此瓶頸。
如果 % Processor Time (_Total) 持續 < 85% 且 % Interrupt Time (_Total) 或 Total % DPC Time (_Total) > 15%,表示可能是因為與應用程式或硬體有關的問題造成效能問題。
Target | Microsoft.Linux.SLES.12.OperatingSystem | ||
Parent Monitor | System.Health.PerformanceState | ||
Category | PerformanceHealth | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | Error | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | Microsoft.Unix.WSMan.Performance.Filtered.Average.Threshold.MonitorType | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="Microsoft.Linux.SLES.12.OperatingSystem.TotalPercentDPCTime.Monitor" Accessibility="Public" Target="Microsoft.Linux.SLES.12.OperatingSystem" TypeID="Unix!Microsoft.Unix.WSMan.Performance.Filtered.Average.Threshold.MonitorType" Enabled="true" ParentMonitorID="SystemHealth!System.Health.PerformanceState">
<Category>PerformanceHealth</Category>
<AlertSettings AlertMessage="Microsoft.Linux.SLES.12.OperatingSystem.TotalPercentDPCTime.AlertMessage">
<AlertOnState>Error</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>Error</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Data/Context/Value$</AlertParameter1>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState HealthState="Success" MonitorTypeStateID="UnderThreshold" ID="UnderThreshold"/>
<OperationalState HealthState="Error" MonitorTypeStateID="OverThreshold" ID="OverThreshold"/>
</OperationalStates>
<Configuration>
<TargetSystem>$Target/Host/Property[Type="Unix!Microsoft.Unix.Computer"]/NetworkName$</TargetSystem>
<Uri>http://schemas.microsoft.com/wbem/wscim/1/cim-schema/2/SCX_ProcessorStatisticalInformation?__cimnamespace=root/scx</Uri>
<Filter/>
<SplitItems>true</SplitItems>
<Interval>300</Interval>
<ObjectName>Processor</ObjectName>
<CounterName>% Interrupt Time</CounterName>
<InstanceName>_Total</InstanceName>
<InstanceProperty>/DataItem/WsManData/*[local-name(.)='SCX_ProcessorStatisticalInformation']/*[local-name(.)='Name']</InstanceProperty>
<Value>$Data/WsManData/*[local-name(.)='SCX_ProcessorStatisticalInformation']/*[local-name(.)='PercentDPCTime']$</Value>
<Threshold>15</Threshold>
<NumSamples>3</NumSamples>
</Configuration>
</UnitMonitor>