Message Queuing failed to listen on IPv4 protocol. Messages will not be accepted on IPv4.
Message Queuing failed to listen on the IPv4 protocol. Messages will not be accepted on IPv4.
Message Queuing is not able to listen to messages on IP version 4 (IPv4). This problem might be caused by one of the following:
IPv4 is not enabled
IPv4 is not supported by hardware or software
IPv4 is not enabled
If IPv4 is disabled, you can enable it yourself by using the following procedure
To enable IPv4:
Open Control Panel. Click Start, and then click Control Panel.
Double-click Network and Sharing Center.
In the Tasks section, click Manage Network Connections.
In Network Connections, right-click the local area network (LAN) icon or your appropriate network controller, and then click Properties.
On the Networking tab, make sure that the Internet Protocol Version 4 (TCP/IPv4) check box is selected.
IPv4 is not supported by hardware or software
Check with your domain administrator for more details.
For more information, see Event ID 2198 ( http://technet.microsoft.com/en-us/library/dd337418(WS.10).aspx)
| Target | Microsoft.MSMQ.2008.Servers | ||
| Category | AvailabilityHealth | ||
| Enabled | False | ||
| Event_ID | 2198 | ||
| Event Source | $Target/Property[Type="Microsoft.MSMQ.2008.ServerRole"]/ServiceName$ | ||
| Alert Generate | True | ||
| Alert Severity | Warning | ||
| Alert Priority | Normal | ||
| Remotable | True | ||
| Alert Message |
| ||
| Event Log | Application |
| ID | Module Type | TypeId | RunAs |
|---|---|---|---|
| DS | DataSource | Microsoft.Windows.EventProvider | Default |
| Alert | WriteAction | System.Health.GenerateAlert | Default |
Home<Rule ID="Microsoft.MSMQ.2008.Rule.Alert.Event2198" Enabled="false" Target="Microsoft.MSMQ.2008.Servers" ConfirmDelivery="true" Remotable="true" Priority="Normal" DiscardLevel="100">
<Category>AvailabilityHealth</Category>
<DataSources>
<DataSource ID="DS" TypeID="Windows!Microsoft.Windows.EventProvider">
<ComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<LogName>Application</LogName>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="UnsignedInteger">2198</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">PublisherName</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">$Target/Property[Type="Microsoft.MSMQ.2008.ServerRole"]/ServiceName$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="Alert" TypeID="SystemHealth!System.Health.GenerateAlert">
<Priority>1</Priority>
<Severity>1</Severity>
<AlertName/>
<AlertDescription/>
<AlertOwner/>
<AlertMessageId>$MPElement[Name="Microsoft.MSMQ.2008.Rule.Alert.Event2198.AlertMessage"]$</AlertMessageId>
<AlertParameters>
<AlertParameter1>$Data/EventDescription$</AlertParameter1>
</AlertParameters>
<Suppression>
<SuppressionValue>$Data/EventDisplayNumber$</SuppressionValue>
<SuppressionValue>$Data/LoggingComputer$</SuppressionValue>
</Suppression>
<Custom1/>
<Custom2/>
<Custom3/>
<Custom4/>
<Custom5/>
<Custom6/>
<Custom7/>
<Custom8/>
<Custom9/>
<Custom10/>
</WriteAction>
</WriteActions>
</Rule>