Una pagina presenta l'ID di oggetto/indice specificato, ma non è allocata da nessuna delle pagine IAM di tale indice. Poiché nell'intestazione della pagina è presente un ID di oggetto/indice errato, per la pagina verrà generato un errore 2533 (pagina non individuata sebbene allocata) corrispondente. L'errore 2533 corrisponde all'indice a cui la pagina è effettivamente allocata.
ERRORE HARDWARE
Run hardware diagnostics and correct any problems. Also examine the Microsoft® Windows NT® system and application logs and the SQL Server™ error log to see if the error occurred as the result of hardware failure. Fix any hardware-related problems.
If you have persistent data corruption problems, try to swap out different hardware components to isolate the problem. Check to ensure that your system does not have write caching enabled on the disk controller. If you suspect this to be the case, contact your hardware vendor.
Finally, you might find it beneficial to switch to a completely new hardware system, including reformatting the disk drives and reinstalling the operating system.
RESTORE FROM BACKUP
If the problem is not hardware related and a known clean backup is available, restore the database from the backup.
DBCC CHECKDB
If no clean backup is available, execute DBCC CHECKDB without a repair clause to determine the extent of the corruption. DBCC CHECKDB will recommend a repair clause to use. Then, execute DBCC CHECKDB with the appropriate repair clause to repair the corruption.
CAUTION: If you are unsure what effect DBCC CHECKDB with a repair clause has on your data, contact your primary support provider before executing this statement.
If running DBCC CHECKDB with one of the repair clauses does not correct the problem, contact your primary support provider.
L'esecuzione di una correzione causerà la ricompilazione dell'indice, se presente. La correzione per l'errore 2533 corrispondente consiste nel deallocare la pagina prima della ricompilazione.
CAUTION: This repair may cause data loss.
If running DBCC CHECKDB with one of the repair clauses does not correct the problem, contact your primary support provider.
Target | Microsoft.SQLServer.2005.DBEngine | ||
Category | EventCollection | ||
Enabled | True | ||
Event_ID | 2534 | ||
Event Source | $Target/Property[Type="SQL!Microsoft.SQLServer.DBEngine"]/ServiceName$ | ||
Alert Generate | True | ||
Alert Severity | Warning | ||
Alert Priority | Normal | ||
Remotable | True | ||
Alert Message |
| ||
Event Log | Application | ||
Comment | Mom2005ID='{8E0F684B-B3A6-4655-91B9-BC49707A3D5B}';MOM2005GroupID={467ECC75-C5DA-42BD-955C-A73BBB51AF74} |
ID | Module Type | TypeId | RunAs |
---|---|---|---|
_F6DA1507_12AF_11D3_AB21_00A0C98620CE_ | DataSource | Microsoft.Windows.EventProvider | Microsoft.SQLServer.SQLDefaultAccount |
GenerateAlert | WriteAction | System.Health.GenerateAlert | Default |
<Rule ID="Microsoft.SQLServer.2005.Table_error__Page_in_its_header_is_allocated_by_another_object_1_5_Rule" Target="SQL2005Core!Microsoft.SQLServer.2005.DBEngine" Enabled="true" ConfirmDelivery="true" Remotable="true" Comment="Mom2005ID='{8E0F684B-B3A6-4655-91B9-BC49707A3D5B}';MOM2005GroupID={467ECC75-C5DA-42BD-955C-A73BBB51AF74}">
<Category>EventCollection</Category>
<DataSources>
<DataSource ID="_F6DA1507_12AF_11D3_AB21_00A0C98620CE_" Comment="{F6DA1507-12AF-11D3-AB21-00A0C98620CE}" TypeID="Windows!Microsoft.Windows.EventProvider" RunAs="SQL!Microsoft.SQLServer.SQLDefaultAccount">
<ComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<LogName>Application</LogName>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery>PublisherName</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value>$Target/Property[Type="SQL!Microsoft.SQLServer.DBEngine"]/ServiceName$</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery>EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value>2534</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="GenerateAlert" TypeID="SystemHealth!System.Health.GenerateAlert">
<Priority>1</Priority>
<Severity>1</Severity>
<AlertMessageId>$MPElement[Name="Microsoft.SQLServer.2005.Table_error__Page_in_its_header_is_allocated_by_another_object_1_5_Rule.AlertMessage"]$</AlertMessageId>
<AlertParameters>
<AlertParameter1>$Data/EventDescription$</AlertParameter1>
</AlertParameters>
<Suppression>
<SuppressionValue/>
</Suppression>
</WriteAction>
</WriteActions>
</Rule>