監視資料庫的頁面確認設定。
此監視器會檢查此資料庫的 [頁面確認] 設定。由於此監視為整體標準需求的一部分,所以如果 [頁面確認] 設定不符合指定的標準,便會產生警示。
頁面確認設定會探索因 I/O 路徑錯誤造成的損毀資料庫頁面。磁碟 I/O 路徑錯誤可能是資料庫損毀問題的原因,這通常是因為電源故障或頁面寫入磁碟時磁碟硬體故障所造成。
PAGE_VERIFY {CHECKSUM | TORN_PAGE_DETECTION | NONE}
如果 [頁面確認] 選項不符合必要的設定,便會引發警告警示。根據預設,當此設定不是 "CHECKSUM" 時,監視器會設定為產生警示。
請按照下列方式解決此問題:
將此資料庫的 [頁面確認] 組態設定變更為符合預期的值。
針對此特定資料庫或所有資料庫覆寫 [頁面確認單元監視] 的預期值。
或者,如果此監視與這個資料庫無關:
請對此特定資料庫或所有資料庫使用覆寫來停用監視。
請對此特定資料庫或所有資料庫使用複寫來停用最上層彙總組態監視。
如需這項設定的詳細資訊,請參閱: ALTER DATABASE SET 選項 (Transact-SQL)
名稱 | 描述 | 預設值 |
警示優先程式 | 定義警示優先順序。 | 一般 |
警示嚴重性 | 定義警示嚴重性。 | 警告 |
停用 SQL Express 檢查 | 啟用或停用檢查 SQL Express 版本。 | 否 |
已啟用 | 啟用或停用該工作流程。 | 否 |
需要的值 | 若要檢視可能的值組,請參閱此監視知識中的<組態>一節。 | 總和檢查碼 |
產生警示 | 定義工作流程是否會產生警示。 | 是 |
間隔 (秒) | 執行工作流程的週期性時間間隔 (秒)。 | 43200 |
逾時 (秒) | 指定工作流程在關閉並標記為失敗前所能執行的時間。 | 300 |
Target | Microsoft.SQLServer.2012.Database | ||
Parent Monitor | Microsoft.SQLServer.2012.Database.RecoveryConfiguration | ||
Category | ConfigurationHealth | ||
Enabled | False | ||
Alert Generate | True | ||
Alert Severity | Warning | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | Microsoft.SQLServer.2012.DBConfigurationStatus | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="Microsoft.SQLServer.2012.Database.Configuration.TornPageDetection" Accessibility="Public" Enabled="false" Target="SQL2012Core!Microsoft.SQLServer.2012.Database" ParentMonitorID="Microsoft.SQLServer.2012.Database.RecoveryConfiguration" Remotable="true" Priority="Normal" TypeID="Microsoft.SQLServer.2012.DBConfigurationStatus" ConfirmDelivery="false">
<Category>ConfigurationHealth</Category>
<AlertSettings AlertMessage="Microsoft.SQLServer.2012.Database.Configuration.TornPageDetection.AlertMessage">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>Warning</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Property[Type="SQL!Microsoft.SQLServer.Database"]/DatabaseName$</AlertParameter1>
<AlertParameter2>$Target/Host/Property[Type="SQL!Microsoft.SQLServer.ServerRole"]/InstanceName$</AlertParameter2>
<AlertParameter3>$Target/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</AlertParameter3>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="ConfigurationValueOK" MonitorTypeStateID="ConfigurationValueOK" HealthState="Success"/>
<OperationalState ID="ConfigurationValueNotOK" MonitorTypeStateID="ConfigurationValueNotOK" HealthState="Warning"/>
</OperationalStates>
<Configuration>
<ConnectionString>$Target/Host/Property[Type="SQL!Microsoft.SQLServer.DBEngine"]/ConnectionString$</ConnectionString>
<DatabaseName>$Target/Property[Type="SQL!Microsoft.SQLServer.Database"]/DatabaseName$</DatabaseName>
<IntervalSeconds>43200</IntervalSeconds>
<SyncTime/>
<ConfigValue>PageVerify</ConfigValue>
<ExpectedValue>CHECKSUM</ExpectedValue>
<ExcludeOnExpress>false</ExcludeOnExpress>
<SQLSKU>$Target/Host/Property[Type="SQL!Microsoft.SQLServer.DBEngine"]/Edition$</SQLSKU>
<TimeoutSeconds>300</TimeoutSeconds>
</Configuration>
</UnitMonitor>