MSSQL on Linux: Table error: Extent object is beyond the range of this database

Microsoft.SQLServer.Linux.EventRule.DBEngine.Table_error__Extent_object_is_beyond_the_range_of_this_database_1_5_Rule (Rule)

P_ID is a PageID of the form (filenum:pageinfile). The pageinfile of this extent is greater than the physical size of the file filenum of the database. The extent is marked allocated in an IAM page for the object/index ID indicated.

Knowledge Base article:

Causes

Resolutions

HARDWARE FAILURE

Run hardware diagnostics and correct any problems. Also, examine the Linux system and application logs and the SQL Server error log to see if the error occurred as the result of hardware failure. Fix any hardware-related problems.

If you have persistent data corruption problems, try to swap out different hardware components to isolate the problem. Check to ensure that your system does not have write caching enabled on the disk controller. If you suspect this to be the case, contact your hardware vendor.

Finally, you might find it beneficial to switch to a completely new hardware system, including reformatting the disk drives and reinstalling the operating system.

RESTORE FROM BACKUP

If the problem is not hardware related and a known clean backup is available, restore the database from the backup.

DBCC CHECKDB

If no clean backup is available, execute DBCC CHECKDB without a repair clause to determine the extent of the corruption. DBCC CHECKDB will recommend a repair clause to use. Then, execute DBCC CHECKDB with the appropriate repair clause to repair the corruption.

CAUTION: If you are unsure what effect DBCC CHECKDB with a repair clause has on your data, contact your primary support provider before executing this statement.

Performing a repair will cause the extent to be de-allocated from the IAM page.

CAUTION: This repair may cause data loss.

If running DBCC CHECKDB with one of the repair clauses does not correct the problem, contact your primary support provider.

Overridable Parameters

Name	Description	Default Value
Enabled	Enables or disables the workflow.	Yes
Interval (seconds)	The recurring interval of time in seconds in which to run the workflow.	300
Priority	Defines Alert Priority.	1
Severity	Defines Alert Severity.	1
Synchronization Time	The synchronization time specified by using a 24-hour format. May be omitted.
Timeout (seconds)	Specifies the time the workflow is allowed to run before being closed and marked as failed.	200
Timeout for query execution (seconds)	The workflow will fail and register an event, if the query execution takes longer than the specified period.	60
Timeout for database connection (seconds)	The workflow will fail and register an event, if it cannot access the database during the specified period.	15

Element properties:

Target

Microsoft.SQLServer.Linux.DBEngine

Category

EventCollection

Enabled

True

Alert Generate

True

Alert Severity

Warning

Alert Priority

Normal

Remotable

True

Alert Message

MSSQL on Linux: Table error: Extent object is beyond the range of this database

{2}

Comment

Mom2017ID='{9DD5BF24-82FD-47A8-80D2-8805964ECA7F}';MOM2017GroupID={467ECC75-C5DA-42BD-955C-A73BBB51AF74}

Member Modules:

ID	Module Type	TypeId	RunAs
_F6DA1507_12AF_11D3_AB21_00A0C98620CE_	DataSource	Microsoft.SQLServer.Linux.DataSource.EventCollectionFiltered	Default
GenerateAlert	WriteAction	System.Health.GenerateAlert	Default

Source Code:

<Rule ID="Microsoft.SQLServer.Linux.EventRule.DBEngine.Table_error__Extent_object_is_beyond_the_range_of_this_database_1_5_Rule" Target="SqlDiscL!Microsoft.SQLServer.Linux.DBEngine" Enabled="true" ConfirmDelivery="true" Remotable="true" Comment="Mom2017ID='{9DD5BF24-82FD-47A8-80D2-8805964ECA7F}';MOM2017GroupID={467ECC75-C5DA-42BD-955C-A73BBB51AF74}">

  <Category>EventCollection</Category>

  <DataSources>

    <DataSource ID="_F6DA1507_12AF_11D3_AB21_00A0C98620CE_" Comment="{F6DA1507-12AF-11D3-AB21-00A0C98620CE}" TypeID="Microsoft.SQLServer.Linux.DataSource.EventCollectionFiltered">

      <MachineName>$Target/Property[Type="SqlCoreLib!Microsoft.SQLServer.Core.DBEngine"]/MachineName$</MachineName>

      <NetbiosComputerName>$Target/Property[Type="SqlCoreLib!Microsoft.SQLServer.Core.DBEngine"]/NetbiosComputerName$</NetbiosComputerName>

      <InstanceName>$Target/Property[Type="SqlCoreLib!Microsoft.SQLServer.Core.DBEngine"]/InstanceName$</InstanceName>

      <ConnectionString>$Target/Property[Type="SqlCoreLib!Microsoft.SQLServer.Core.DBEngine"]/ConnectionString$</ConnectionString>

      <InstanceVersion>$Target/Property[Type="SqlCoreLib!Microsoft.SQLServer.Core.DBEngine"]/Version$</InstanceVersion>

      <InstanceEdition>$Target/Property[Type="SqlCoreLib!Microsoft.SQLServer.Core.DBEngine"]/Edition$</InstanceEdition>

      <SqlExecTimeoutSeconds>60</SqlExecTimeoutSeconds>

      <SqlTimeoutSeconds>15</SqlTimeoutSeconds>

      <TimeoutSeconds>200</TimeoutSeconds>

      <IntervalSeconds>300</IntervalSeconds>

      <SyncTime/>

      <EventDisplayNumber>2579</EventDisplayNumber>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="GenerateAlert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>1</Priority>

      <Severity>1</Severity>

      <AlertMessageId>$MPElement[Name="Microsoft.SQLServer.Linux.EventRule.DBEngine.Table_error__Extent_object_is_beyond_the_range_of_this_database_1_5_Rule.AlertMessage"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Target/Property[Type="SqlCoreLib!Microsoft.SQLServer.Core.DBEngine"]/MachineName$</AlertParameter1>

        <AlertParameter2>$Target/Property[Type="SqlCoreLib!Microsoft.SQLServer.Core.DBEngine"]/InstanceName$</AlertParameter2>

        <AlertParameter3>Event ID: $Data/Property[@Name='EventID']$. $Data/Property[@Name='Message']$</AlertParameter3>

      </AlertParameters>

      <Suppression>

        <SuppressionValue/>

      </Suppression>

    </WriteAction>

  </WriteActions>

</Rule>