Solaris 11 Process Utmp Monitor
The utmp daemon is not running. Check the Diagnostic and Recovery results to see if further action is required.
The utmp daemon monitors the utmp database to ensure that entries inserted by non-root processes are cleaned upon process termination.
A failure indicates that the utmpd service on the system is down.
Check the service on the system by running ps -ef | grep utmpd or by viewing the diagnostic in the Operations Manager Console. If it is down, you can start the process using the command "/etc/init.d/utmpd start" or by clicking the recovery link in the Operations Manager Console.
For root cause analysis, first check the system log file (/var/adm/messages), and view any related entries at the time of failure. You may also check the system for any process core files. Use '/usr/bin/pstack [corefile]' to print a stack trace which will assist in troubleshooting the cause of failure.
Target | Microsoft.Solaris.11.OperatingSystem | ||
Parent Monitor | System.Health.AvailabilityState | ||
Category | AvailabilityHealth | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | Error | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | Microsoft.Unix.WSMan.Process.Status.MonitorType | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="Microsoft.Solaris.11.Process.Utmp.Monitor" Accessibility="Public" Target="Microsoft.Solaris.11.OperatingSystem" TypeID="Unix!Microsoft.Unix.WSMan.Process.Status.MonitorType" Enabled="true" ParentMonitorID="SystemHealth!System.Health.AvailabilityState">
<Category>AvailabilityHealth</Category>
<AlertSettings AlertMessage="Microsoft.Solaris.11.Process.Utmp.AlertMessage">
<AlertOnState>Error</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>Error</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Host/Property[Type="Unix!Microsoft.Unix.Computer"]/PrincipalName$</AlertParameter1>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState HealthState="Success" MonitorTypeStateID="Running" ID="Running"/>
<OperationalState HealthState="Error" MonitorTypeStateID="NotRunning" ID="NotRunning"/>
</OperationalStates>
<Configuration>
<TargetSystem>$Target/Host/Property[Type="Unix!Microsoft.Unix.Computer"]/NetworkName$</TargetSystem>
<ProcessName>utmpd</ProcessName>
<Interval>300</Interval>
</Configuration>
</UnitMonitor>