Home
  •  

Internal MAC Receive Errors

Microsoft.SystemCenter.NetworkDevice.Interface.Ethernet.InternalMacReceiveErrorThresholdMonitor (UnitMonitor)

Knowledge Base article:

Summary

Internal MAC Receive Errors Threshold Monitor.

Causes

Below are the details of the Object Identifier (OID) that is queried via an SNMP GET

Object

OID

Description

dot3StatsInternalMacReceiveErrors

.1.3.6.1.2.1.10.7.2.1.16

A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsFrameTooLongs object, the dot3StatsAlignmentErrors object, or the dot3StatsFCSErrors object. The precise meaning of the count represented by an instance of this object is implementation-specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted.

Resolutions

Below are some basic troubleshooting steps

  1. Check the cabling to the device.

  2. Perform any vendor specific hardware tests on the device to determine if the device's hardware is functioning properly

  3. Raise the threshold on the monitor. This will allow for better "tuning" of the application to your environment. Take care no to raise the threshold too much as this could allow important events to go unnoticed.

Element properties:

TargetMicrosoft.SystemCenter.NetworkDevice.Interface.Ethernet
Parent MonitorSystem.Health.PerformanceState
CategoryPerformanceHealth
EnabledFalse
Alert GenerateTrue
Alert SeverityError
Alert PriorityNormal
Alert Auto ResolveFalse
Monitor TypeMicrosoft.SystemCenter.NetworkDevice.SnmpDeltaThresholdMonitorType
RemotableTrue
AccessibilityPublic
Alert Message
Internal MAC Receive Errors Exceed Threshold
The count of internal MAC receive errors on this interface has exceeded the defined threshold.
RunAsDefault

Source Code:

<UnitMonitor ID="Microsoft.SystemCenter.NetworkDevice.Interface.Ethernet.InternalMacReceiveErrorThresholdMonitor" Accessibility="Public" Enabled="false" Target="Microsoft.SystemCenter.NetworkDevice.Interface.Ethernet" ParentMonitorID="Health!System.Health.PerformanceState" Remotable="true" Priority="Normal" TypeID="Microsoft.SystemCenter.NetworkDevice.SnmpDeltaThresholdMonitorType" ConfirmDelivery="false">

  <Category>PerformanceHealth</Category>

  <AlertSettings AlertMessage="Microsoft.SystemCenter.NetworkDevice.Interface.Ethernet.InternalMacReceiveErrorThresholdMonitor.AlertMessage">

    <AlertOnState>Error</AlertOnState>

    <AutoResolve>false</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

  </AlertSettings>

  <OperationalStates>

    <OperationalState HealthState="Success" MonitorTypeStateID="UnderThreshold" ID="BelowThreshold"/>

    <OperationalState HealthState="Error" MonitorTypeStateID="OverThreshold" ID="AboveThreshold"/>

  </OperationalStates>

  <Configuration>

    <Interval>180</Interval>

    <IP>$Target/Host/Property[Type="NetworkDevice!Microsoft.SystemCenter.NetworkDevice"]/IPAddress$</IP>

    <CommunityString>$Target/Host/Property[Type="NetworkDevice!Microsoft.SystemCenter.NetworkDevice"]/CommunityString$</CommunityString>

    <Version>$Target/Host/Property[Type="NetworkDevice!Microsoft.SystemCenter.NetworkDevice"]/Version$</Version>

    <SnmpVarBinds>

      <SnmpVarBind>

        <OID>1.3.6.1.2.1.10.7.2.1.16.$Target/Property[Type="Microsoft.SystemCenter.NetworkDevice.Interface"]/ifIndex$</OID>

        <Syntax>2</Syntax>

        <Value VariantType="3"/>

      </SnmpVarBind>

    </SnmpVarBinds>

    <Threshold>0</Threshold>

  </Configuration>

</UnitMonitor>