クォーラムが失われたためクラスター サービスがシャットダウンしています
クォーラムが失われたためクラスター サービスがシャットダウンしています。これは、クラスター内の一部またはすべてのノードでネットワーク接続が失われた場合、または監視ディスクがフェールオーバーした場合に発生する可能性があります。現在オンラインになっているノードの数が少ないために新しい構成でクォーラムを獲得できないときに、ノード数を増やすなど、クラスター構成を変更した場合にも発生する可能性があります。
イベント ログを確認し、状況に当てはまる操作を選択します。
以下の手順を実行するには、各クラスター化されたサーバーのローカルの Administrators グループに所属し、ドメイン アカウントを使用するか、または同等の権限を委任されている必要があります。
構成の検証ウィザードを使用してネットワーク構成を確認するには:
クォーラム構成の情報を参照するには:
フェールオーバー クラスターのスナップインを開くには、[スタート]、[管理ツール]、[フェールオーバー クラスター管理] の順にクリックします。[ユーザー アカウント制御] ダイアログ ボックスが表示されたら、表示された操作が正しいことを確認し、[続行] をクリックします。
フェールオーバー クラスター管理スナップインで、コンソール ツリーの [フェールオーバー クラスター管理] が選択されていることを確認します。次に、[管理] の下にある [構成の検証] をクリックします。
ウィザードの指示に従って、テストするクラスターを指定します。
[テスト オプション] ページで [選択するテストのみを実行する] を選択します。
[テストの選択] ページで、[ネットワーク] テスト以外のすべてのチェック ボックスをオフにします。
ウィザードの手順に従って、テストを実行します。
[概要] ページで [レポートの表示] をクリックします。
フェールオーバー クラスターのスナップインを開くには、[スタート]、[管理ツール]、[フェールオーバー クラスター管理] の順にクリックします。[ユーザー アカウント制御] ダイアログ ボックスが表示されたら、表示された操作が正しいことを確認し、[続行] をクリックします。
フェールオーバー クラスター管理スナップインで、管理対象のクラスターが表示されない場合は、コンソール ツリーで [フェールオーバー クラスター管理] を右クリックし、[クラスターの管理] をクリックして、目的のクラスターを選択または指定します。
コンソール ツリーで、クラスターが選択されていることを確認します。
中央のウィンドウの上部付近で、[クォーラム構成] を表示します。
クォーラム構成がノード数 (偶数または奇数) に適切かどうかを判断するための情報を参照するには、[ヘルプ] をクリックし、[トピックの検索] をクリックし、[目次] タブをクリックします。フェールオーバー クラスターのヘルプの目次を展開し、「フェールオーバー クラスターの変更の設定」を展開し、「フェールオーバー クラスターのクォーラム構成について」をクリックします。 このトピックの「クォーラム構成の選択」で、選択とノード数の関連について説明しています。クラスター内のクォーラム構成を変更するには、ヘルプの同じセクションにある「クラスターのクォーラム オプションを選択する」も参照してください。
Target | Microsoft.Windows.6.2.Cluster.Monitoring.Service | ||
Category | Alert | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | Error | ||
Alert Priority | Normal | ||
Remotable | True | ||
Alert Message |
|
ID | Module Type | TypeId | RunAs |
---|---|---|---|
DS | DataSource | Microsoft.Windows.6.2.Cluster.EventProvider | Default |
WA | WriteAction | Microsoft.Windows.Cluster.GenerateAlertAction.SuppressedByDescription | Default |
<Rule ID="Microsoft.Windows.6.2.Cluster.Management.Monitoring.The.Cluster.service.is.shutting.down.because.quorum.was.lost" Enabled="true" Target="Clus8Library!Microsoft.Windows.6.2.Cluster.Monitoring.Service" ConfirmDelivery="true" Remotable="true" Priority="Normal" DiscardLevel="100">
<Category>Alert</Category>
<DataSources>
<DataSource ID="DS" TypeID="Microsoft.Windows.6.2.Cluster.EventProvider">
<Criteria>
<SimpleExpression>
<ValueExpression>
<XPathQuery>EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value>1177</Value>
</ValueExpression>
</SimpleExpression>
</Criteria>
<LogName>System</LogName>
<PublisherName>Microsoft-Windows-FailoverClustering</PublisherName>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="WA" TypeID="ClusLibrary!Microsoft.Windows.Cluster.GenerateAlertAction.SuppressedByDescription">
<Priority>1</Priority>
<Severity>2</Severity>
<AlertMessageId>$MPElement[Name="Microsoft.Windows.6.2.Cluster.Management.Monitoring.The.Cluster.service.is.shutting.down.because.quorum.was.lost.AlertMessage"]$</AlertMessageId>
</WriteAction>
</WriteActions>
</Rule>