이 모니터는 지정된 IPv4 범위의 여유 주소 백분율이 정의된 임계값보다 낮을 경우 경고를 표시합니다.
Microsoft Windows Server DHCP 2016 및 1709 이상의 백분율 IPv4 개별 범위 모니터링은 지정된 범위의 여유 백분율을 포함하는 속성 모음을 반환합니다.
필요할 경우 재정의할 수 있는 매개 변수는 다음과 같습니다.
샘플 수: 모니터의 새 상태를 계산하기 위해 기다릴 횟수입니다.
경고 임계값: 정상 상태로 허용되는 최소 백분율입니다.
오류 임계값: 경고 상태로 허용되는 최소 백분율입니다.
간격(초): 각실행에해당하는시간(초)
동기화시간: 이형식으로표현되는시간은 "hh:mm"이며 실행을 시작할 시간
시간 제한(초): “시간 제한 이유”로 인해 실행을 취소할 때까지 대기할 시간(초)입니다.
초기 행: 페이징에 사용되는 초기 행입니다. 기본값은 0으로, 모든 레코드를 반환합니다.
최종 행: 페이징에 사용되는 최종 행입니다. 기본값은 0으로, 모든 레코드를 반환합니다.
지원되는 최대 페이징 수량은 2,000개 범위입니다.
사용 가능한 범위 주소를 확인합니다.
해당 클라이언트에 제공할 수 있는 IP 주소가 DHCP 서버 2016 및 1709 이상의에 없는 경우 새로 할당된 IP를 가져오지 못할 수 있습니다. 이 경우 다음 해결 방법을 사용하세요.
범위 확장을 사용하여 현재 범위에 대한 주소 범위를 확장합니다.
임대 기간을 축소하고 정리 간격을 줄입니다. 그러면 만료된 범위 IP 주소를 빨리 확보하는 데 도움이 됩니다.
DHCP 범위 확장
DHCP 범위가 이미 있고 시작 주소 및 끝 주소가 특정 서브넷의 모든 주소를 현재 포함하지 않는 경우 범위 속성에서 시작 주소 또는 끝 주소를 확장하여 범위의 주소 수를 늘릴 수 있습니다.
클라이언트가 사용할 수 있는 주소 수를 늘리려면:
DHCP 서버에서 [시작]을 클릭하고 [관리 도구]를 가리킨 다음 [DHCP]를 클릭합니다.
콘솔 트리에서 확장할 범위를 마우스 오른쪽 단추로 클릭한 다음 [속성]을 클릭합니다.
시작 IP 주소 및 끝 IP 주소를 변경하여 범위를 확장합니다.
임대 기간 축소
이 절차를 수행하려면 Administrators 그룹 구성원이거나 적절한 권한을 위임 받아야 합니다.
임대 기간을 축소하려면:
DHCP 서버에서 [시작]을 클릭하고 [관리 도구]를 가리킨 다음 [DHCP]를 클릭합니다.
DCHP 콘솔 트리에서 구성할 범위를 마우스 오른쪽 단추로 클릭한 다음 [속성]을 클릭합니다.
일반 탭의 DHCP 클라이언트 임대 기간에서 새 임대 기간을 입력합니다.
정리 간격 줄임
이 절차를 수행하려면 Administrators 그룹 구성원이거나 적절한 권한을 위임 받아야 합니다.
Netsh 명령을 사용하여 정리 간격 시간을 설정하려면:
DHCP 서버에서 [시작], [실행]을 차례로 클릭하고 cmd를 입력한 다음 <Enter> 키를 누릅니다.
netsh dhcp set databasecleanupinterval "NewInterval"을 입력합니다. 여기에서 "NewInterval"은 DHCP 데이터베이스 정리 간격 시간(분)입니다.
예
다음 예제에서 이 명령은 데이터베이스 정리 간격을 10,080분(7일마다)으로 설정합니다.
netsh dhcp set databasecleanupinterval 10080
Target | Microsoft.Windows.DHCPServer.10.0.IPv4Scope | ||
Parent Monitor | System.Health.AvailabilityState | ||
Category | StateCollection | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | MatchMonitorHealth | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | Microsoft.Windows.DHCPServer.10.0.IndScopeStats.MonitorType | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | System.PrivilegedMonitoringAccount |
<UnitMonitor ID="Microsoft.Windows.DHCPServer.10.0.IndScope.IPV4.FreeScopeAddresses.Percentage.Monitor" Accessibility="Public" Enabled="true" Target="Microsoft.Windows.DHCPServer.10.0.IPv4Scope" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="Microsoft.Windows.DHCPServer.10.0.IndScopeStats.MonitorType" ConfirmDelivery="false" RunAs="System!System.PrivilegedMonitoringAccount">
<Category>StateCollection</Category>
<AlertSettings AlertMessage="Microsoft.Windows.DHCPServer.10.0.Scope.IPV4.FreeScopeAddresses.Percentage.Monitor.AlertMessage">
<AlertOnState>Error</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</AlertParameter1>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="ScopeAddressesAvailable" MonitorTypeStateID="Success" HealthState="Success"/>
<OperationalState ID="ScopeAddressesLow" MonitorTypeStateID="Warning" HealthState="Warning"/>
<OperationalState ID="ScopeAddressesVeryLow" MonitorTypeStateID="Error" HealthState="Error"/>
</OperationalStates>
<Configuration>
<Scope>$Target/Property[Type="DHCP!Microsoft.Windows.DHCPServer.Library.Scope"]/IPAddress$</Scope>
<CounterName>IPV4Scope-PercentageAvailable</CounterName>
<ComputerName>$Target/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</ComputerName>
<NumSamples>3</NumSamples>
<WarningThreshold>30</WarningThreshold>
<ErrorThreshold>10</ErrorThreshold>
<IntervalSeconds>900</IntervalSeconds>
<SyncTime/>
<TimeoutSeconds>300</TimeoutSeconds>
<InitialRow>0</InitialRow>
<FinalRow>0</FinalRow>
</Configuration>
</UnitMonitor>