도메인 컨트롤러의 인바운드 복제 상태를 확인합니다.
이 모니터는 도메인 컨트롤러가 모든 인바운드 복제 파트너를 사용하여 올바르게 복제하는지를 확인합니다.
인바운드 파트너에 대한 복제가 실패하면 도메인 컨트롤러 간에 AD 데이터가 일치하지 않을 수 있습니다.
간격(초)
기본값: 300초(5분)입니다.
최대 복제 대기 시간(분)
AD에서 다르게 구성된 경우가 아니면 모든 명명 컨텍스트는 1시간 이내에 복제되어야 합니다. 기본값은 최소 지연을 허용하는 65분입니다. Active Directory 토폴로지에 따라 이 임계값을 적절히 조정해야 할 수 있습니다.
최대 복제 대기 시간 RootDSE(분)
RootDSE는 가장 많이 변경하는 NC이므로 몇 분 내에 복제해야 합니다. RootDSE는 너무 자주 복제를 수행하므로 RootDSE에 보다 엄격한 복제 임계값을 허용하기 위해 이 컨트롤이 추가되었습니다. 기본적으로 복제 임계값은 15분으로 설정됩니다.
발생하는 경고는 이 도메인 컨트롤러에서 복제 파트너 하나 이상을 사용하여 복제하는 데 문제가 있음을 나타냅니다.
도메인 컨트롤러가 AD의 명명 컨텍스트를 하나 이상 복제하지 못하면 해당 데이터(예: 사용자/컴퓨터 계정 및 암호 등)가 부실해지며 오래된 상태가 될 수 있습니다.
포리스트의 다른 도메인 컨트롤러 중 하나를 다시 부팅하는 중이거나 도메인 컨트롤러에서 유지 관리를 수행하는 중에 이 경고가 발생할 수 있습니다. DC가 ping에 응답하는지 여부를 확인하면 이러한 현상을 완화할 수 있지만, 이 모니터에서는 거짓 부정이 다소 발생할 수 있습니다.
문제가 발생하는 도메인 컨트롤러에 로그온한 다음 진단을 실행하면 복제가 실패한 이유를 확인할 수 있습니다. 복제 오류를 진단할 때는 다음 진단 명령을 사용할 수 있습니다.
Repadmin /ShowRepl
Repadmin /replsum
dcdiag /test:Intersite
dcdiag /test:KccEvent
dcdiag /test:ObjectsReplicated
dcdiag /test:Replications
dcdiag /test:VerifyReplicas
Target | Microsoft.Windows.Server.2012.R2.AD.DomainControllerRole | ||
Parent Monitor | Microsoft.Windows.Server.2012.R2.AD.ReplicationMonitors.AggregateMonitor | ||
Category | Custom | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | MatchMonitorHealth | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | Microsoft.Windows.Server.2012.R2.AD.Availability.ReplicationShowReplCheck.Monitortype | ||
Remotable | False | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="Microsoft.Windows.Server.2012.R2.AD.Availability.ReplicationShowReplCheck.Monitor" Accessibility="Public" Enabled="true" Target="AD2012R2Core!Microsoft.Windows.Server.2012.R2.AD.DomainControllerRole" ParentMonitorID="Microsoft.Windows.Server.2012.R2.AD.ReplicationMonitors.AggregateMonitor" Remotable="false" Priority="Normal" TypeID="Microsoft.Windows.Server.2012.R2.AD.Availability.ReplicationShowReplCheck.Monitortype" ConfirmDelivery="false">
<Category>Custom</Category>
<AlertSettings AlertMessage="Microsoft.Windows.Server.2012.R2.AD.Availability.ReplicationShowReplCheck.AlertMessage">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Data/Context/Property[@Name='ErrorString']$</AlertParameter1>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="ReplicationShowReplCheckOK" MonitorTypeStateID="ReplicationShowReplCheckOK" HealthState="Success"/>
<OperationalState ID="ReplicationShowReplCheckWarn" MonitorTypeStateID="ReplicationShowReplCheckWarn" HealthState="Warning"/>
<OperationalState ID="ReplicationShowReplCheckError" MonitorTypeStateID="ReplicationShowReplCheckError" HealthState="Error"/>
</OperationalStates>
<Configuration>
<IntervalSeconds>300</IntervalSeconds>
<ReplLatencyThreshold>65</ReplLatencyThreshold>
<TimeoutSeconds>300</TimeoutSeconds>
<RootDSEReplLatencyThreshold>15</RootDSEReplLatencyThreshold>
</Configuration>
</UnitMonitor>