監視邏輯磁碟上的可用空間百分比以及剩餘的可用 MB 數。只有當可用空間百分比閾值與可用 MB 數閾值兩者均偏低時,磁碟才會標幟為磁碟可用空間不足。
邏輯磁碟區上的可用磁碟空間已超過閾值。系統效能可能會受到負面影響,且在空出更多可用空間之前可能將無法新增或修改邏輯磁碟區上的現有檔案。
邏輯磁碟可用空間監視常式是一種具高度可設定性的解決方案,能讓操作員用來設定各種系統和非系統邏輯磁碟區的閾值。此外並可針對警告和錯誤狀態設定不同的閾值。
由於邏輯磁碟區的大小差異極大,小自數 GB 而大至多個 TB 以上,因此操作員在設定邏輯磁碟可用空間監視常式時,必須指定 MB 數閾值和百分比閾值,且必須在達到警告和錯誤閾值之前超過該閾值。這表示必須同時達到根據 MB 數和百分比所設的系統或非系統磁碟機閾值,才有可能達到閾值。
邏輯磁碟可用空間監視常式的預設閾值包括:
系統磁碟機可用空間閾值 (預設值)
參數 | 預設值 |
系統磁碟機錯誤 MB 閾值 | 100 |
系統磁碟機錯誤百分比閾值 | 5 |
系統磁碟機警告 MB 閾值 | 200 |
系統磁碟機警告百分比閾值 | 10 |
非系統磁碟機可用空間閾值 (預設值)
參數 | 預設值 |
非系統磁碟機錯誤 MB 閾值 | 1000 |
非系統磁碟機錯誤百分比閾值 | 5 |
非系統磁碟機警告 MB 閾值 | 2000 |
非系統磁碟機警告百分比閾值 | 10 |
請注意,覆寫可用來變更上述定義的任一種閾值。此外,這些閾值可套用到管理群組中所有的邏輯磁碟區執行個體,或者於必要時亦可針對特定的邏輯磁碟區執行個體單獨定義閾值。
當現有的檔案大小變大以及加入新檔案時,都會佔用邏輯磁碟的可用空間。當邏輯磁碟上的可用空間容量低於閾值時,邏輯磁碟的狀態將會改變。
若要增加可用磁碟空間的容量,請執行下列一項或多項操作:
執行 [清理磁碟] 以在磁碟上取得更多可用空間。
備份並移除檔案,或從磁碟中刪除不必要的檔案。
將檔案移至另一個磁碟或離線存放裝置。
購買額外的存放裝置或切換至更大的磁碟。
若要檢視磁碟空間最近的歷程,可使用下列檢視:
啟動磁碟容量檢視
Target | Microsoft.Windows.Server.6.2.LogicalDisk | ||
Parent Monitor | System.Health.AvailabilityState | ||
Category | Custom | ||
Enabled | False | ||
Alert Generate | True | ||
Alert Severity | MatchMonitorHealth | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | Microsoft.Windows.Server.6.2.FreeSpace.Monitortype | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="Microsoft.Windows.Server.6.2.LogicalDisk.FreeSpace" Accessibility="Public" Enabled="false" Target="WindowsServer!Microsoft.Windows.Server.6.2.LogicalDisk" ParentMonitorID="SystemHealth!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="Microsoft.Windows.Server.6.2.FreeSpace.Monitortype" ConfirmDelivery="true">
<Category>Custom</Category>
<AlertSettings AlertMessage="Microsoft.Windows.Server.6.2.LogicalDisk.FreeSpace.AlertMessage">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Property[Type="Windows!Microsoft.Windows.LogicalDevice"]/DeviceID$</AlertParameter1>
<AlertParameter2>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="UnderWarningThresholds" MonitorTypeStateID="UnderWarningThresholds" HealthState="Success"/>
<OperationalState ID="OverWarningUnderErrorThresholds" MonitorTypeStateID="OverWarningUnderErrorThresholds" HealthState="Warning"/>
<OperationalState ID="OverErrorThresholds" MonitorTypeStateID="OverErrorThresholds" HealthState="Error"/>
</OperationalStates>
<Configuration>
<ComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<DiskLabel>$Target/Property[Type="Windows!Microsoft.Windows.LogicalDevice"]/DeviceID$</DiskLabel>
<IntervalSeconds>900</IntervalSeconds>
<SystemDriveWarningMBytesThreshold>500</SystemDriveWarningMBytesThreshold>
<SystemDriveWarningPercentThreshold>10</SystemDriveWarningPercentThreshold>
<SystemDriveErrorMBytesThreshold>300</SystemDriveErrorMBytesThreshold>
<SystemDriveErrorPercentThreshold>5</SystemDriveErrorPercentThreshold>
<NonSystemDriveWarningMBytesThreshold>2000</NonSystemDriveWarningMBytesThreshold>
<NonSystemDriveWarningPercentThreshold>10</NonSystemDriveWarningPercentThreshold>
<NonSystemDriveErrorMBytesThreshold>1000</NonSystemDriveErrorMBytesThreshold>
<NonSystemDriveErrorPercentThreshold>5</NonSystemDriveErrorPercentThreshold>
<NumSamples>4</NumSamples>
</Configuration>
</UnitMonitor>