このイベントは、システムの起動時に論理ディスク マネージャーがダイナミック ディスクおよびボリュームを自動的に開始できなかったことを示します。
ダイナミック ボリュームは、この問題が解決されるまで使用できません。
このイベントは、Dmboot.sys によってシステム ログに記録されます。システム ログには、エラーの原因を示す、他の記憶装置ドライバーからの追加情報が含まれている場合があります。
サンプル イベント:
イベントの種類 : エラー
イベント ソース : dmboot
イベントの分類 :なし
イベント ID: 6
日付 : MM/DD/YYYY
時刻 : HH:MM:SS AM/PM
ユーザー: 該当なし
コンピューター : Computer_Name
説明:
dmboot:ディスク グループ Computer_NameDg0 を自動インポートできません。ディスク グループのすべてのボリュームは利用できません。
考えられる原因には、次のようなものがあります。
ダイナミック ディスクとの通信を妨げるハードウェアの障害がある (ディスク、コントローラー、またはケーブルの障害など)。
すべてのダイナミック ディスクが破損している。
ディスクを再アクティブ化します。これを実行するには、次の操作を行います。
ディスク管理スナップインを開き、ダイナミック ディスクの状態を確認します。
未検出またはオフライン状態のディスクを特定します。
[ディスクの再アクティブ化] を使ってディスクを再アクティブ化します。
それでも問題が解決しない場合は、次の手順に従います。
1.ディスク管理スナップインを開きます。
2.ディスクを再スキャンし、失敗したディスクとボリュームを再アクティブ化します。ディスクがミラー ボリュームまたは RAID-5 ボリュームのメンバーだった場合は、必要に応じてボリュームを再同期または再生成します。
3.再アクティブ化したボリュームで chkdsk を実行します。
障害がないか、ハードウェアの状態を確認します。アプリケーション ログとシステム ログには、エラーの原因を示す、他の記憶装置ドライバーからの他のイベントが記録されている場合があります。
ディスク、コントローラー、ケーブル、および他のハードウェアの状態を確認します。
根本原因を特定して解決した後、以下の操作を実行してください。
1.ディスク管理スナップインを開きます。
2.ディスクを再スキャンし、失敗したディスクとボリュームを再アクティブ化します。ディスクがミラー ボリュームまたは RAID-5 ボリュームのメンバーだった場合は、必要に応じてボリュームを再同期または再生成します。
3.再アクティブ化したボリュームで chkdsk を実行します。
Target | Microsoft.Windows.Server.6.2.OperatingSystem | ||
Category | EventCollection | ||
Enabled | False | ||
Alert Generate | True | ||
Alert Severity | Warning | ||
Alert Priority | Normal | ||
Remotable | True | ||
Alert Message |
| ||
Event Log | Application |
ID | Module Type | TypeId | RunAs |
---|---|---|---|
EventDS | DataSource | Microsoft.Windows.EventProvider | Default |
GenerateAlert | WriteAction | System.Health.GenerateAlert | Default |
<Rule ID="Microsoft.Windows.Server.6.2.OperatingSystem.LDMAutoImportFailed.Alert" Enabled="false" Target="WindowsServer!Microsoft.Windows.Server.6.2.OperatingSystem" ConfirmDelivery="true">
<Category>EventCollection</Category>
<DataSources>
<DataSource ID="EventDS" TypeID="Windows!Microsoft.Windows.EventProvider">
<ComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<LogName>Application</LogName>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery>EventSourceName</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value>dmboot</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery>EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value>6</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="GenerateAlert" TypeID="SystemHealth!System.Health.GenerateAlert">
<Priority>1</Priority>
<Severity>1</Severity>
<AlertMessageId>$MPElement[Name="Microsoft.Windows.Server.6.2.OperatingSystem.LDMAutoImportFailed.Alert.AlertMessage"]$</AlertMessageId>
<AlertParameters>
<AlertParameter1>$Data/EventDescription$</AlertParameter1>
</AlertParameters>
<Suppression>
<SuppressionValue/>
</Suppression>
</WriteAction>
</WriteActions>
</Rule>