此事件表示邏輯磁碟管理員無法與任何動態磁碟通訊,因此整個動態磁碟群組離線。
在問題解決之前,動態磁碟區將無法使用。
此事件由 Dmboot.sys 張貼至系統記錄中。系統記錄可能包含來自其他存放驅動程式且指出失敗原因的其他資訊。
範例事件:
Dmboot.sys 事件識別碼: 5
dmboot: 磁碟群組 MyMachineDg0 失敗。 磁碟群組內的所有磁碟區皆無法使用。
可能的原因包括:
導致無法與任何動態磁碟通訊的硬體失敗 (例如磁碟、控制器或纜線失敗)。
所有動態磁碟損毀。
執行下列一項或多項操作以診斷並解決問題:
如果這樣做仍無法解決問題,請檢查是否有任何硬體失敗。
1. 使用磁碟管理重新掃描磁碟,然後重新啟動任何失敗的磁碟或磁碟區。
2. 如果磁碟是鏡像或 RAID-5 磁碟區的成員,請在必要時重新同步處理或重新產生磁碟區。
3. 在重新啟動的所有磁碟區上執行 chkdsk。
開啟磁碟管理嵌入式管理單元,然後檢查動態磁碟的狀態。 識別處於遺失或離線狀態的磁碟。 使用磁碟管理嵌入式管理單元重新啟用遺失或離線的磁碟。如果這樣做仍不能解決問題,請檢查是否有任何硬體失敗。
檢查事件檢視器中來自其他存放驅動程式且可能會指出失敗原因的其他事件。
檢查磁碟、控制器、纜線及其他硬體的狀態。
確定並解決根本問題之後,請開啟磁碟管理嵌入式管理單元並執行下列操作:1. 使用磁碟管理重新掃描磁碟,然後重新啟動任何失敗的磁碟或磁碟區。2. 如果磁碟是鏡像或 RAID-5 磁碟區的成員,請在必要時重新同步處理或重新產生磁碟區。3. 在重新啟動的所有磁碟區上執行 chkdsk。
Target | Microsoft.Windows.Server.6.2.OperatingSystem | ||
Category | EventCollection | ||
Enabled | False | ||
Alert Generate | True | ||
Alert Severity | Warning | ||
Alert Priority | Normal | ||
Remotable | True | ||
Alert Message |
| ||
Event Log | Application |
ID | Module Type | TypeId | RunAs |
---|---|---|---|
EventDS | DataSource | Microsoft.Windows.EventProvider | Default |
GenerateAlert | WriteAction | System.Health.GenerateAlert | Default |
<Rule ID="Microsoft.Windows.Server.6.2.OperatingSystem.LDMDiskGroupFailed.Alert" Enabled="false" Target="WindowsServer!Microsoft.Windows.Server.6.2.OperatingSystem" ConfirmDelivery="true">
<Category>EventCollection</Category>
<DataSources>
<DataSource ID="EventDS" TypeID="Windows!Microsoft.Windows.EventProvider">
<ComputerName>$Target/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</ComputerName>
<LogName>Application</LogName>
<Expression>
<And>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery>EventSourceName</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value>dmboot</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
<Expression>
<SimpleExpression>
<ValueExpression>
<XPathQuery>EventDisplayNumber</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value>5</Value>
</ValueExpression>
</SimpleExpression>
</Expression>
</And>
</Expression>
</DataSource>
</DataSources>
<WriteActions>
<WriteAction ID="GenerateAlert" TypeID="SystemHealth!System.Health.GenerateAlert">
<Priority>1</Priority>
<Severity>1</Severity>
<AlertMessageId>$MPElement[Name="Microsoft.Windows.Server.6.2.OperatingSystem.LDMDiskGroupFailed.Alert.AlertMessage"]$</AlertMessageId>
<AlertParameters>
<AlertParameter1>$Data/EventDescription$</AlertParameter1>
</AlertParameters>
<Suppression>
<SuppressionValue/>
</Suppression>
</WriteAction>
</WriteActions>
</Rule>