DPM: Data corruption detected during read (3129)

Microsoft.Windows.SystemCenterDPM.DataCorruptionDetectedDuringRead (UnitMonitor)

Data corruption detected during read

Knowledge Base article:

Summary

DPM has detected data inconsistency during the backup of this data source.

Causes

The likely causes are:

IO error on the protected computer
Hardware issues on the protected computer

Resolutions

Review the system event log of protected computer for any hardware-related errors, and rectify them.

Run hardware diagnostic tools to verify health of the hardware.

Run application specific integrity checks to ensure logical consistency of data. In case of failure, recover the data from last recovery point and perform application specific integrity check. Repeat the process with previous recovery points till a logical consistent recovery point is recovered.

Create new recovery points manually for the data source indicated in the error.

Run integrity check more frequently.

Element properties:

Target

Microsoft.Windows.SystemCenterDPM.DataSource

Parent Monitor

System.Health.AvailabilityState

Category

EventCollection

Enabled

True

Alert Generate

True

Alert Severity

Warning

Alert Priority

Normal

Alert Auto Resolve

True

Monitor Type

Microsoft.Windows.2SingleEventLog2StateMonitorType

Remotable

True

Accessibility

Internal

Alert Message

DPM: Data corruption detected during read (3129)

{0}

RunAs

Default

Source Code:

<UnitMonitor ID="Microsoft.Windows.SystemCenterDPM.DataCorruptionDetectedDuringRead" Accessibility="Internal" Enabled="true" Target="Microsoft.Windows.SystemCenterDPM.DataSource" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="Windows!Microsoft.Windows.2SingleEventLog2StateMonitorType" ConfirmDelivery="true">

  <Category>EventCollection</Category>

  <AlertSettings AlertMessage="Microsoft.Windows.SystemCenterDPM.DataCorruptionDetectedDuringRead_AlertMessageResourceID">

    <AlertOnState>Warning</AlertOnState>

    <AutoResolve>true</AutoResolve>

    <AlertPriority>Normal</AlertPriority>

    <AlertSeverity>Warning</AlertSeverity>

    <AlertParameters>

      <AlertParameter1>$Data/Context/Params/Param[12]$</AlertParameter1>

    </AlertParameters>

  </AlertSettings>

  <OperationalStates>

    <OperationalState ID="FirstEventRaised" MonitorTypeStateID="FirstEventRaised" HealthState="Warning"/>

    <OperationalState ID="SecondEventRaised" MonitorTypeStateID="SecondEventRaised" HealthState="Success"/>

  </OperationalStates>

  <Configuration>

    <FirstComputerName>$Target/Host/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</FirstComputerName>

    <FirstLogName>DPM Alerts</FirstLogName>

    <FirstExpression>

      <And>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value Type="UnsignedInteger">1</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="String">PublisherName</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value Type="String">DPM-EM</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="String">Params/Param[2]</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value Type="String">3129</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="String">Params/Param[3]</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value Type="String">$Target/Property[Type="Microsoft.Windows.SystemCenterDPM.DataSource"]/DataSourceId$</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="String">Params/Param[4]</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value Type="String">$Target/Host/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="String">Params/Param[5]</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value Type="String">$Target/Host/Property[Type="Microsoft.Windows.SystemCenterDPM.ProductionServer"]/ServerNameLong$</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

      </And>

    </FirstExpression>

    <SecondComputerName>$Target/Host/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/NetworkName$</SecondComputerName>

    <SecondLogName>DPM Alerts</SecondLogName>

    <SecondExpression>

      <And>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="UnsignedInteger">EventDisplayNumber</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value Type="UnsignedInteger">2</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="String">PublisherName</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value Type="String">DPM-EM</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="String">Params/Param[2]</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value Type="String">3129</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="String">Params/Param[3]</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value Type="String">$Target/Property[Type="Microsoft.Windows.SystemCenterDPM.DataSource"]/DataSourceId$</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="String">Params/Param[4]</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value Type="String">$Target/Host/Host/Host/Property[Type="Windows!Microsoft.Windows.Computer"]/PrincipalName$</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

        <Expression>

          <SimpleExpression>

            <ValueExpression>

              <XPathQuery Type="String">Params/Param[5]</XPathQuery>

            </ValueExpression>

            <Operator>Equal</Operator>

            <ValueExpression>

              <Value Type="String">$Target/Host/Property[Type="Microsoft.Windows.SystemCenterDPM.ProductionServer"]/ServerNameLong$</Value>

            </ValueExpression>

          </SimpleExpression>

        </Expression>

      </And>

    </SecondExpression>

  </Configuration>

</UnitMonitor>