Monitor Description for (459)
What Caused the Problem?
The controller was placed into Data Assurance Analysis Lockdown as an excessive number of Data Assurance errors have been detected on one or more volumes. The Recovery Guru Details area provides specific information you will need as you follow the recovery steps.
Important Notes
The controller in lockdown mode must be brought back online by your Technical Support Representative first if the alternate controller is in service mode. The controller in lockdown mode has the most current data and data loss could occur if the controller in service mode is brought online first.
If write caching on any volume is enabled, it might be automatically suspended until this issue is corrected and all batteries are fully charged (if batteries are present). To see if caching is disabled, use the
Storage > Volume > Change > Cache Settings
menu option. Any option with the red dot icon is currently suspended.
Recovery Steps
1 | Contact your Technical Support Representative to evaluate the Data Assurance errors on this controller and bring it back online. |
Target | NetAppSANtricity.StorageArray | ||
Parent Monitor | NetAppSANtricity.StorageArrayAvailability | ||
Category | Custom | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | Error | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | NetAppSANtricity.FailureUnitMonitorType | ||
Remotable | True | ||
Accessibility | Internal | ||
Alert Message |
| ||
RunAs | Default | ||
Comment | Machine generated entity |
<UnitMonitor ID="NetAppSANtricity.FailureID_0459_Monitor" Accessibility="Internal" Enabled="true" Target="NetAppSANtricity.StorageArray" ParentMonitorID="NetAppSANtricity.StorageArrayAvailability" Remotable="true" Priority="Normal" TypeID="NetAppSANtricity.FailureUnitMonitorType" ConfirmDelivery="true" Comment="Machine generated entity">
<Category>Custom</Category>
<AlertSettings AlertMessage="NetAppSANtricity.REC_PI_ERROR_LOCKDOWN_AlertMessageResourceID">
<AlertOnState>Error</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>Error</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Data/Context/Property[@Name='FailureDescription']$</AlertParameter1>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="NetAppSANtricity.StateId7F3AE537F641F41B24027E118F8DBE28" MonitorTypeStateID="NoIssue" HealthState="Success"/>
<OperationalState ID="NetAppSANtricity.StateIdAD23DD5120A1C5FE50C73437048C63D" MonitorTypeStateID="IssueFound" HealthState="Error"/>
</OperationalStates>
<Configuration>
<FailureID>459</FailureID>
<IntervalSeconds>361</IntervalSeconds>
<TimeoutSeconds>300</TimeoutSeconds>
<Trace>0</Trace>
</Configuration>
</UnitMonitor>