Home
  •  

UPS Alert trap Rule - The UPS batteries are low

SCUtils.APC.UPS.Trap.Rule.lowBattery (Rule)

Knowledge Base article:

Summary

SNMP Trap from APC UPS

Causes

The UPS batteries are low and will soon be exhausted. If utility power is not restored the UPS will put itself to 'sleep' and immediately cut power to the load.

Resolutions

Please use the APC web interface for more detailed information.

Element properties:

TargetSCUtils.APC.UPS
CategoryAlert
EnabledTrue
Alert GenerateTrue
Alert SeverityError
Alert PriorityNormal
RemotableTrue
Alert Message
UPS Alert trap Rule - The UPS batteries are low

The UPS batteries are low and will soon be exhausted.

Source {0}
Location is {1}
IP {2}
Primary owner is {3}

Member Modules:

ID Module Type TypeId RunAs 
DS DataSource System.NetworkManagement.SnmpTrapEventProvider Default
Alert WriteAction System.Health.GenerateAlert Default

Source Code:

<Rule ID="SCUtils.APC.UPS.Trap.Rule.lowBattery" Enabled="true" Target="SCUtils.APC.UPS" ConfirmDelivery="false" Remotable="true" Priority="Normal" DiscardLevel="100">

  <Category>Alert</Category>

  <DataSources>

    <DataSource ID="DS" TypeID="NetworkLibrary!System.NetworkManagement.SnmpTrapEventProvider">

      <IP>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</IP>

      <OIDProps>

        <OIDProp>.1.3.6.1.4.1.318.0.7</OIDProp>

      </OIDProps>

      <EventOriginId>$Target/Id$</EventOriginId>

      <PublisherId>$Target/Id$</PublisherId>

      <PublisherName>Snmp Event</PublisherName>

      <Channel>SnmpEvent</Channel>

      <LoggingComputer/>

      <EventNumber>1501</EventNumber>

      <EventCategory>5</EventCategory>

      <EventLevel>10</EventLevel>

      <UserName/>

      <Params/>

    </DataSource>

  </DataSources>

  <WriteActions>

    <WriteAction ID="Alert" TypeID="Health!System.Health.GenerateAlert">

      <Priority>1</Priority>

      <Severity>2</Severity>

      <AlertOwner/>

      <AlertMessageId>$MPElement[Name="SCUtils.APC.UPS.Trap.Rule.lowBattery.AlertMessage"]$</AlertMessageId>

      <AlertParameters>

        <AlertParameter1>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/sysName$</AlertParameter1>

        <AlertParameter2>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/Location$</AlertParameter2>

        <AlertParameter3>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/SNMPAddress$</AlertParameter3>

        <AlertParameter4>$Target/Property[Type="NetworkLibrary!System.NetworkManagement.Node"]/PrimaryOwnerContact$</AlertParameter4>

      </AlertParameters>

      <Suppression>

        <SuppressionValue/>

      </Suppression>

      <Custom1/>

      <Custom2/>

      <Custom3/>

      <Custom4/>

      <Custom5/>

      <Custom6/>

      <Custom7/>

      <Custom8/>

      <Custom9/>

      <Custom10/>

    </WriteAction>

  </WriteActions>

</Rule>