このデバイスのプロセッサ使用率を監視します。
このモニターは、監視しているデバイスのプロセッサがどの程度使用されているかを示します。モニターの状態は、次のいずれかになります。
正常:プロセッサ使用率 (%) がしきい値未満です。
エラー: プロセッサ使用率 (%) がしきい値を超えています。
このモニターでは、次のオプションを構成できます。
オプション | 定義 | 既定 |
間隔 | デバイスの状態を確認する間隔 (秒) | 240 秒 |
再試行回数 | 各監視期間内でサンプリングを中止するまでに再試行する回数 | 3 |
サンプル数 | モニターの状態が変わるまでの連続サンプルの数 | 3 |
タイムアウト | 値をサンプリングするときにデバイスからの応答を待つ時間。この時間が過ぎると、サンプリングがタイムアウトし、再びサンプリングが開始されます。 | 3,500 ミリ秒 |
しきい値 | プロセッサの使用率 (%) | 90 |
このモニターは、ネットワーク デバイスのプロセッサ使用率が、構成されているしきい値を上回るとエラー状態になります。プロセッサ使用率は、プロセッサの持つ処理能力がどの程度使用されているかをパーセントで表した値です。既定値は 90% です。
ヘルス エクスプローラーにあるモニターの [状態変更イベント] タブで、状態の変更の詳細を確認します。ここには、ヘルス状態が変わる原因になった、パフォーマンス カウンターの計算された値が示されています。問題の詳細と解決方法については、デバイスの製造元のドキュメントを参照してください。
Target | System.NetworkManagement.Cisco_Performance_Processor | ||
Parent Monitor | System.Health.PerformanceState | ||
Category | PerformanceHealth | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | MatchMonitorHealth | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | System.NetworkManagement.ThresholdMonitor.ProcessorUtilization | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="System.NetworkManagement.Cisco.Processor.HighUtilization" Accessibility="Public" Enabled="true" Target="NetworkLibrary!System.NetworkManagement.Cisco_Performance_Processor" ParentMonitorID="SystemHealth!System.Health.PerformanceState" Remotable="true" Priority="Normal" TypeID="System.NetworkManagement.ThresholdMonitor.ProcessorUtilization" ConfirmDelivery="false">
<Category>PerformanceHealth</Category>
<AlertSettings AlertMessage="System.NetworkManagement.Generic.Processor.HighUtilization.AlertMessage">
<AlertOnState>Error</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Host/Property[Type="System!System.Entity"]/DisplayName$</AlertParameter1>
<AlertParameter2>$Data/Context/Value$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="UnderThreshold" MonitorTypeStateID="MTSThresholdSuccess" HealthState="Success"/>
<OperationalState ID="OverThreshold" MonitorTypeStateID="MTSThresholdError" HealthState="Error"/>
</OperationalStates>
<Configuration>
<Interval>300</Interval>
<NoOfRetries>3</NoOfRetries>
<Timeout>3500</Timeout>
<Threshold>90</Threshold>
<NumberOfSamples>3</NumberOfSamples>
<ObjectName>Processor</ObjectName>
<CounterName>% Processor Time</CounterName>
</Configuration>
</UnitMonitor>