監視此裝置上的處理器使用率等級
此監視會指出此裝置上的處理器使用率等級。 此監視有兩種可能的狀態:
狀況良好: 處理器使用率百分比低於閾值。
錯誤: 處理器使用率百分比超過閾值。
您可以在此監視上設定下列選項:
選項 | 定義 | 預設 |
間隔 | 裝置狀態檢查的間隔時間,以秒為單位 | 240 秒 |
重試次數 | 在捨棄監視間隔的樣本之前,每個間隔的嘗試次數 | 3 |
樣本數 | 監視變更狀態之前的連續樣本數 | 3 |
逾時 | 在樣本逾時並重新嘗試取樣值之前,等待裝置回應的時間,以毫秒為單位 | 3,500 毫秒 |
閾值 | 正在使用的整體處理器容量百分比 | 90 |
當網路裝置上的處理器使用率等級大於設定的閾值時,此監視便會進入錯誤狀態。 使用率會以處理器整體容量的百分比表示。 預設值為 90%。
請使用健全狀況總管,在監視的 [狀態變更事件] 索引標籤上查看狀態變更的詳細資料。 此資料顯示導致健全狀況狀態變更的計算效能計數器值。 請參考裝置製造商的文件,以取得有關問題和疑難排解程序的詳細資訊。
Target | System.NetworkManagement.Cisco_Performance_Processor | ||
Parent Monitor | System.Health.PerformanceState | ||
Category | PerformanceHealth | ||
Enabled | True | ||
Alert Generate | True | ||
Alert Severity | MatchMonitorHealth | ||
Alert Priority | Normal | ||
Alert Auto Resolve | True | ||
Monitor Type | System.NetworkManagement.ThresholdMonitor.ProcessorUtilization | ||
Remotable | True | ||
Accessibility | Public | ||
Alert Message |
| ||
RunAs | Default |
<UnitMonitor ID="System.NetworkManagement.Cisco.Processor.HighUtilization" Accessibility="Public" Enabled="true" Target="NetworkLibrary!System.NetworkManagement.Cisco_Performance_Processor" ParentMonitorID="SystemHealth!System.Health.PerformanceState" Remotable="true" Priority="Normal" TypeID="System.NetworkManagement.ThresholdMonitor.ProcessorUtilization" ConfirmDelivery="false">
<Category>PerformanceHealth</Category>
<AlertSettings AlertMessage="System.NetworkManagement.Generic.Processor.HighUtilization.AlertMessage">
<AlertOnState>Error</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>MatchMonitorHealth</AlertSeverity>
<AlertParameters>
<AlertParameter1>$Target/Host/Property[Type="System!System.Entity"]/DisplayName$</AlertParameter1>
<AlertParameter2>$Data/Context/Value$</AlertParameter2>
</AlertParameters>
</AlertSettings>
<OperationalStates>
<OperationalState ID="UnderThreshold" MonitorTypeStateID="MTSThresholdSuccess" HealthState="Success"/>
<OperationalState ID="OverThreshold" MonitorTypeStateID="MTSThresholdError" HealthState="Error"/>
</OperationalStates>
<Configuration>
<Interval>300</Interval>
<NoOfRetries>3</NoOfRetries>
<Timeout>3500</Timeout>
<Threshold>90</Threshold>
<NumberOfSamples>3</NumberOfSamples>
<ObjectName>Processor</ObjectName>
<CounterName>% Processor Time</CounterName>
</Configuration>
</UnitMonitor>