Bu rapor bir süre içinde belirli bir ağ cihazındaki boş bellek yüzdesini gösterir.
Bu rapor bir süre içinde bir ağ cihazındaki boş bellek yüzdesini gösterir.
Açıklama:
Bu rapor seçili ağ cihazında bir zaman içindeki boş belleği toplam cihaz belleğinin bir yüzdesi olarak gösterir.
Parametreler:
Tarih/Saat Seçimi: rapor için göreli veya sabit tarihlerle bir dönem tanımlanmasına olanak sağlar.
İş saatleri: Bir iş saatleri zaman aralığının ve bunun geçerli olduğu hafta günlerinin tanımlanmasına olanak sağlar. İş saatleri tanımlanmışsa, bu rapor yalnızca bu aralık içinde rapor verir.
Histogram: Raporun x ekseni için kullanılan değerlerin seçilmesine olanak sağlar.
- | Günlük olarak saatlere göre |
- | Seçilen zaman aralığı için x ekseni bir gün olur. |
- | Her x ekseni birimi bir saattir. |
- | Bu histogramın gösterilmesi için aynı saat için değerlerin ortalaması alınır. |
- | Haftalık olarak iş günlerine göre |
- | X ekseninin zaman aralığı bir haftadır. |
- | Her birim bir hafta günüdür. |
- | Aylık olarak günlere göre |
- | X ekseninin zaman aralığı bir aydır. |
- | Her birim ayın sayısal bir günüdür |
- | Aya göre yıllık |
- | X ekseninin zaman aralığı bir yıldır. |
- | Her birim bir aydır. |
Varsayılan hayırdır (tarihsel grafik)
3B Grafik: Raporun düz bir görüntüde mi yoksa 3B bir görüntüde mi gösterileceğini seçmeye olanak sağlar.
Nesne Listesi:
Bu rapor Bellek türünde nesneleri bekler.
"Grup Ekle" düğmesini kullanarak bir grup veya ağ cihazı belirtmek de mümkündür. Rapor gruptaki veya ağ cihazındaki tüm nesneler için ortalama değeri gösterir.
Base | Microsoft.SystemCenter.DataWarehouse.Report.CustomPerformance |
Target | System.NetworkManagement.Memory |
Accessibility | Internal |
Visible | True |
<LinkedReport ID="System.NetworkManagement.Reports.MemoryUtilization" Accessibility="Internal" Target="NetworkLibrary!System.NetworkManagement.Memory" Visible="true" Base="ReportLibrary!Microsoft.SystemCenter.DataWarehouse.Report.CustomPerformance">
<ParameterBlock xmlns="http://schemas.microsoft.com/mom/reporting/2007/ReportParameterSettings" columns="6">
<Controls>
<Control type="Microsoft.SystemCenter.DataWarehouse.Report.ParameterControl.ComboBox" columnSpan="2" rowSpan="1">
<ReportParameters>
<ReportParameter name="DataAggregation">
<Prompt>Microsoft.SystemCenter.DataWarehouse.Report.Library!Microsoft.SystemCenter.DataWarehouse.Report.ParameterPrompt.DataAggregation</Prompt>
</ReportParameter>
</ReportParameters>
</Control>
<Control type="Microsoft.SystemCenter.DataWarehouse.Report.ParameterControl.ComboBox" columnSpan="2" rowSpan="1">
<ReportParameters>
<ReportParameter name="AggregationType">
<Prompt>Microsoft.SystemCenter.DataWarehouse.Report.Library!Microsoft.SystemCenter.DataWarehouse.Report.ParameterPrompt.Histogram</Prompt>
</ReportParameter>
</ReportParameters>
</Control>
<Control type="Microsoft.SystemCenter.DataWarehouse.Report.ParameterControl.BusinessRelativeDateTimePicker" columnSpan="2" rowSpan="2">
<ReportParameters>
<ReportParameter name="TimeZone" binding="TimeZone">
<Prompt>Microsoft.SystemCenter.DataWarehouse.Report.Library!Microsoft.SystemCenter.DataWarehouse.Report.ParameterPrompt.TimeZone</Prompt>
</ReportParameter>
<ReportParameter name="TimeZoneName" binding="TimeZoneName"/>
<ReportParameter name="StartDate_BaseType" binding="StartDate_BaseType"/>
<ReportParameter name="StartDate_BaseValue" binding="StartDate_BaseValue">
<Prompt>Microsoft.SystemCenter.DataWarehouse.Report.Library!Microsoft.SystemCenter.DataWarehouse.Report.ParameterPrompt.StartDateTime</Prompt>
</ReportParameter>
<ReportParameter name="StartDate_OffsetType" binding="StartDate_OffsetType"/>
<ReportParameter name="StartDate_OffsetValue" binding="StartDate_OffsetValue"/>
<ReportParameter name="EndDate_BaseType" binding="EndDate_BaseType"/>
<ReportParameter name="EndDate_BaseValue" binding="EndDate_BaseValue">
<Prompt>Microsoft.SystemCenter.DataWarehouse.Report.Library!Microsoft.SystemCenter.DataWarehouse.Report.ParameterPrompt.EndDateTime</Prompt>
</ReportParameter>
<ReportParameter name="EndDate_OffsetType" binding="EndDate_OffsetType"/>
<ReportParameter name="EndDate_OffsetValue" binding="EndDate_OffsetValue"/>
<ReportParameter name="TimeType" binding="TimeType"/>
<ReportParameter name="TimeWeekMap" binding="TimeWeekMap"/>
</ReportParameters>
</Control>
<Control type="Microsoft.SystemCenter.DataWarehouse.Report.ParameterControl.MonitoringObjectXmlPicker" columnSpan="4" rowSpan="3">
<ReportParameters>
<ReportParameter name="ObjectList">
<Prompt>Microsoft.SystemCenter.DataWarehouse.Report.Library!Microsoft.SystemCenter.DataWarehouse.Report.ParameterPrompt.ObjectList</Prompt>
</ReportParameter>
<ReportParameter name="ManagementGroupId" binding="GroupList"/>
</ReportParameters>
<Properties>
<Property name="TypeFilter">
<Value>System.NetworkManagement.Memory</Value>
</Property>
</Properties>
</Control>
<Control type="Microsoft.SystemCenter.DataWarehouse.Report.ParameterControl.BooleanPicker" columnSpan="2" rowSpan="1">
<ReportParameters>
<ReportParameter name="Enable3D">
<Prompt>Microsoft.SystemCenter.DataWarehouse.Report.Library!Microsoft.SystemCenter.DataWarehouse.Report.ParameterPrompt.Chart3D</Prompt>
</ReportParameter>
</ReportParameters>
</Control>
</Controls>
</ParameterBlock>
<Parameters>
<Parameter Name="ManagementPackSystemName">
<Value>System.NetworkManagement.Reports</Value>
</Parameter>
<Parameter Name="ReportSystemName">
<Value>System.NetworkManagement.Reports.CustomPerformance.DisplayStrings</Value>
</Parameter>
<Parameter Name="RulesManagementPackSystemName">
<Value>Microsoft.SystemCenter.DataWarehouse.Report.Libraryg</Value>
</Parameter>
<Parameter Name="ReportTitle">
<Value>R.Title.MemoryUtilization</Value>
</Parameter>
<Parameter Name="ReportDescription">
<Value>R.Description.MemoryUtilization</Value>
</Parameter>
<Parameter Name="DataAggregation">
<Value>1</Value>
</Parameter>
<Parameter Name="AggregationType">
<Value>0</Value>
</Parameter>
<Parameter Name="OptionList">
<Value>
<Data>
<Values>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.A3Com.Memory.FreeMemoryPct"]$</Rule>
<Color>239,250,102</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.Accelar.Memory.FreeMemoryPct"]$</Rule>
<Color>55,153,71</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.Adtran.Memory.FreeMemoryPct"]$</Rule>
<Color>63,63,255</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.ArrowPoint.Memory.FreeMemoryPct"]$</Rule>
<Color>255,128,0</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.ArrowPoint_368.Memory.FreeMemoryPct"]$</Rule>
<Color>255,0,0</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.Aruba.Memory.FreeMemoryPct"]$</Rule>
<Color>0,128,0</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.AvayaVPNetEnvMon.Memory.FreeMemoryPct"]$</Rule>
<Color>255,255,0</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.BluecoatRsc.Memory.FreeMemoryPct"]$</Rule>
<Color>157,195,191</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.ByteMobileRAM.Memory.FreeMemoryPct"]$</Rule>
<Color>157,175,199</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.ByteMobileSWAP.Memory.FreeMemoryPct"]$</Rule>
<Color>157,175,199</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.Cisco.Memory.FreeMemoryPct"]$</Rule>
<Color>0,0,128</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.CiscoWLAN4402.Memory.FreeMemoryPct"]$</Rule>
<Color>119,106,88</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.Citrix.Memory.FreeMemoryPct"]$</Rule>
<Color>1,5,45</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.CNT_Ultranet.Global_Memory.FreeMemoryPct"]$</Rule>
<Color>159,252,108</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.CNT_Ultranet.Local_Memory.FreeMemoryPct"]$</Rule>
<Color>250,210,110</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.Crossbeam.Memory.FreeMemoryPct"]$</Rule>
<Color>19,189,185</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.F5Rsc.Memory.FreeMemoryPct"]$</Rule>
<Color>95,1,1</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.Force10Rsc.Memory.FreeMemoryPct"]$</Rule>
<Color>195,21,15</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.Foundry.Memory.FreeMemoryPct"]$</Rule>
<Color>132,243,21</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.HostResources.Memory.FreeMemoryPct"]$</Rule>
<Color>80,255,128</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.HuaweiAseriesRouter.Memory.FreeMemoryPct"]$</Rule>
<Color>0,60,128</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.HuaweiMA56XX.Memory.FreeMemoryPct"]$</Rule>
<Color>0,80,128</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.HuaweiRouter.Memory.FreeMemoryPct"]$</Rule>
<Color>30,60,128</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.HuaweiSwitch.Memory.FreeMemoryPct"]$</Rule>
<Color>255,128,250</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.IOSXR.Memory.FreeMemoryPct"]$</Rule>
<Color>204,4,4</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.JuniperRouter.Memory.FreeMemoryPct"]$</Rule>
<Color>204,14,14</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.NetscreenRscISG1000.Memory.FreeMemoryPct"]$</Rule>
<Color>80,255,66</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.Overture.Memory.FreeMemoryPct"]$</Rule>
<Color>153,118,35</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.Radware.Memory.FreeMemoryPct"]$</Rule>
<Color>13,118,55</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.RedBack.Memory.FreeMemoryPct"]$</Rule>
<Color>153,118,155</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.Tellabs.Memory.FreeMemoryPct"]$</Rule>
<Color>153,168,55</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.UCD_Real.Memory.FreeMemoryPct"]$</Rule>
<Color>153,118,55</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.UCD_SNMP.Memory.FreeMemoryPct"]$</Rule>
<Color>15,18,55</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.UCD_Swap.Memory.FreeMemoryPct"]$</Rule>
<Color>153,11,175</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.UnisphereRouter.Memory.FreeMemoryPct"]$</Rule>
<Color>53,138,5</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.Voltaire.Memory.FreeMemoryPct"]$</Rule>
<Color>203,132,5</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.Wellfleet.Memory.FreeMemoryPct"]$</Rule>
<Color>20,118,55</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.CiscoSystem.Memory.FreeMemoryPct"]$</Rule>
<Color>100,60,255</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
<Value>
<Rule>$MPElement[Name="NetworkMonitoring!System.NetworkManagement.Cosine.Memory.BufferUtilizationPct"]$</Rule>
<Color>0,60,255</Color>
<Type>Line</Type>
<Scale>1</Scale>
</Value>
</Values>
</Data>
</Value>
</Parameter>
<Parameter Name="UnitsXml">
<Value>
<Data>
<Units>
<Unit>
<Value>1</Value>
<Label>R.UnitOption.Percentage</Label>
</Unit>
</Units>
</Data>
</Value>
</Parameter>
</Parameters>
</LinkedReport>