All Rules in Microsoft.Windows.MSMQ.2012.R2 Management Pack

	DisplayName	Description	ID	Target	Category	Enabled	Instance Name	Counter Name	Frequency	Event_ID	Event Source	Alert Generate	Alert Severity	Alert Priority	Remotable	Event Log
	The Message Queuing service cannot start due to bad registry value.	The Message Queuing service cannot start due to bad registry value.	Microsoft.MSMQ.6.3.Rule.Alert.Event2000	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2000	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing service cannot start due to inability to write a registry key.	The Message Queuing service cannot start due to inability to write a registry key.	Microsoft.MSMQ.6.3.Rule.Alert.Event2001	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2001	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	At least one of the required dependencies was not found.	At least one of the required dependencies was not found.	Microsoft.MSMQ.6.3.Rule.Alert.Event2002	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2002	MSMQ Cluster Resource DLL	True	Warning	Normal	True	Application
	There are insufficient memory resources.	There are insufficient memory resources.	Microsoft.MSMQ.6.3.Rule.Alert.Event2003	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2003	MSMQ Cluster Resource DLL	True	Warning	Normal	True	Application
	The Message Queuing service is not online with Active Directory.	The Message Queuing service is not online with Active Directory.	Microsoft.MSMQ.6.3.Rule.Alert.Event2015	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2015	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing service cannot start due to internal private queue problem.	The Message Queuing service cannot start due to internal private queue problem.	Microsoft.MSMQ.6.3.Rule.Alert.Event2020	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2020	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing service cannot start due to problem with message store.	The Message Queuing service cannot start due to problem with message store.	Microsoft.MSMQ.6.3.Rule.Alert.Event2023	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2023	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing service cannot start due to problem with Active Directory interface.	The Message Queuing service cannot start due to problem with Active Directory interface.	Microsoft.MSMQ.6.3.Rule.Alert.Event2035	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2035	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing service deleted a message that couldn't be restored because the queue doesn't exist.	The Message Queuing service deleted a message that couldn't be restored because the queue doesn't exist.	Microsoft.MSMQ.6.3.Rule.Alert.Event2043	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2043	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing service has insufficient privileges to create audit log messages.	The Message Queuing service has insufficient privileges to create audit log messages.	Microsoft.MSMQ.6.3.Rule.Alert.Event2044	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2044	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Error	Normal	True	Application
	The Message Queuing service cannot start due to problem with DTC.	The Message Queuing service cannot start due to problem with DTC.	Microsoft.MSMQ.6.3.Rule.Alert.Event2047	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2047	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing service cannot start due to problem with incoming sequences checkpoint file.	The Message Queuing service cannot start due to problem with incoming sequences checkpoint file.	Microsoft.MSMQ.6.3.Rule.Alert.Event2053	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2053	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	MSMQ Server RPC interface cannot use the TCP/IP protocol.	MSMQ Server RPC interface cannot use the TCP/IP protocol.	Microsoft.MSMQ.6.3.Rule.Alert.Event2059	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2059	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing service cannot start due to problem with local RPC interface.	The Message Queuing service cannot start due to problem with local RPC interface.	Microsoft.MSMQ.6.3.Rule.Alert.Event2061	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2061	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing service cannot start due to problem with transactions checkpoint file.	The Message Queuing service cannot start due to problem with transactions checkpoint file.	Microsoft.MSMQ.6.3.Rule.Alert.Event2064	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2064	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The list of Message Queuing servers with directory service functionality in the Windows registry is empty.	The list of Message Queuing servers with directory service functionality in the Windows registry is empty.	Microsoft.MSMQ.6.3.Rule.Alert.Event2068	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2068	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Logger files cannot be initialized.	Logger files cannot be initialized.	Microsoft.MSMQ.6.3.Rule.Alert.Event2076	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2076	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queueing sevice cannot start.	The Message Queuing service cannot start because the log file cannot be recovered.	Microsoft.MSMQ.6.3.Rule.Alert.Event2079	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2079	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Error	High	True	Application
	The Message Queuing service cannot start due to problem with log files.	The Message Queuing service cannot start due to problem with log files.	Microsoft.MSMQ.6.3.Rule.Alert.Event2083	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2083	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing service cannot start because a queue is in an inconsistent state.	The Message Queuing service cannot start because a queue is in an inconsistent state.	Microsoft.MSMQ.6.3.Rule.Alert.Event2084	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2084	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The message file cannot be created due to insufficient disk space or memory	The message file cannot be created due to insufficient disk space or memory	Microsoft.MSMQ.6.3.Rule.Alert.Event2085	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2085	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing folder cannot be created.	The Message Queuing folder cannot be created.	Microsoft.MSMQ.6.3.Rule.Alert.Event2096	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2096	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing registry values cannot be read. The registry is probably corrupted.	The Message Queuing registry values cannot be read. The registry is probably corrupted.	Microsoft.MSMQ.6.3.Rule.Alert.Event2097	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2097	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Error	Normal	True	Application
	Message Queuing was unable to create the MSMQ object in Active Directory.	Message Queuing was unable to create the MSMQ object in Active Directory.	Microsoft.MSMQ.6.3.Rule.Alert.Event2116	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2116	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing was unable to load Mqupgrd.dll.	Message Queuing was unable to load Mqupgrd.dll.	Microsoft.MSMQ.6.3.Rule.Alert.Event2117	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2117	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing was unable to find the address of MqCreateMsmqObj in Mqupgrd.dll.	Message Queuing was unable to find the address of MqCreateMsmqObj in Mqupgrd.dll.	Microsoft.MSMQ.6.3.Rule.Alert.Event2118	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2118	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing service was unable to obtain the properties of the MSMQ object from Active Directory.	The Message Queuing service was unable to obtain the properties of the MSMQ object from Active Directory.	Microsoft.MSMQ.6.3.Rule.Alert.Event2120	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2120	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	This domain controller is not trusted for delegation.	This domain controller is not trusted for delegation. Therefore, the Message Queuing server cannot run.	Microsoft.MSMQ.6.3.Rule.Alert.Event2122	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2122	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Error	Normal	True	Application
	The Message Queuing server cannot determine if the local domain controller is trusted for delegation.	The Message Queuing server cannot determine if the local domain controller is trusted for delegation.	Microsoft.MSMQ.6.3.Rule.Alert.Event2123	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2123	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Error	Normal	True	Application
	The Message Queuing service failed to join the computer's domain.	The Message Queuing service failed to join the computer's domain.	Microsoft.MSMQ.6.3.Rule.Alert.Event2124	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2124	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing objects cannot move automatically between domains	Message Queuing objects cannot move automatically between domains	Microsoft.MSMQ.6.3.Rule.Alert.Event2127	Microsoft.MSMQ.6.3.Servers	PerformanceHealth	False			0	2197	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	This server was unable to resolve the IP addresses of other routing servers.	This server was unable to resolve the IP addresses of other routing servers.	Microsoft.MSMQ.6.3.Rule.Alert.Event2140	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2140	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Error	Normal	True	Application
	The properties of the queue cannot be set. Copying the queue file to the temporary file returned an error.	The properties of the queue cannot be set. Copying the queue file to the temporary file returned an error.	Microsoft.MSMQ.6.3.Rule.Alert.Event2141	Microsoft.MSMQ.6.3.Servers	PerformanceHealth	False			0	2141	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The properties of the queue cannot be set. Replacing the queue fil with the temporary file returned error.	The properties of the queue cannot be set. Replacing the queue fil with the temporary file returned error.	Microsoft.MSMQ.6.3.Rule.Alert.Event2142	Microsoft.MSMQ.6.3.Servers	PerformanceHealth	False			0	2142	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Microsoft Distributed Transaction Coordinator (DTC) failed.	The Microsoft Distributed Transaction Coordinator (DTC) failed.	Microsoft.MSMQ.6.3.Rule.Alert.Event2143	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2143	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Computer object not found in Active Directory.	Computer object not found in Active Directory, possibly because of Active Directory replication delays.	Microsoft.MSMQ.6.3.Rule.Alert.Event2145	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2145	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	MSMQ service cannot start due to insufficient disk space or memory.	MSMQ service cannot start due to insufficient disk space or memory.	Microsoft.MSMQ.6.3.Rule.Alert.Event2147	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2147	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	MSMQ service cannot start due to its failure to connect to its device driver.	MSMQ service cannot start due to its failure to connect to its device driver.	Microsoft.MSMQ.6.3.Rule.Alert.Event2148	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2148	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing service stopped monitoring a mapping folder.	The Message Queuing service stopped monitoring a mapping folder.	Microsoft.MSMQ.6.3.Rule.Alert.Event2155	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2155	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Mapping file contents cannot be read.	Mapping file contents cannot be read.	Microsoft.MSMQ.6.3.Rule.Alert.Event2156	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2156	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Mapping file URL already mapped to another queue.	Mapping file URL already mapped to another queue.	Microsoft.MSMQ.6.3.Rule.Alert.Event2157	Microsoft.MSMQ.6.3.Queues	AvailabilityHealth	False			0	0		True	Error	Normal	True	Application
	MSMQ mapping file was ignored.	MSMQ mapping file was ignored.	Microsoft.MSMQ.6.3.Rule.Alert.Event2158	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2158	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	A queue cannot listen/bind to multicast address.	A queue cannot listen/bind to multicast address.	Microsoft.MSMQ.6.3.Rule.Alert.Event2160	Microsoft.MSMQ.6.3.Queues	AvailabilityHealth	False			0	2160	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Invalid URL mapped to queue.	Invalid URL mapped to queue.	Microsoft.MSMQ.6.3.Rule.Alert.Event2161	Microsoft.MSMQ.6.3.Queues	AvailabilityHealth	False			0	0		True	Error	Normal	True	Application
	Message Queueing service cannot join the domain.	Message Queueing service cannot join the domain.	Microsoft.MSMQ.6.3.Rule.Alert.Event2164	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2164	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The sites where the computer resides cannot be resolved.	The sites where the computer resides cannot be resolved.	Microsoft.MSMQ.6.3.Rule.Alert.Event2165	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2165	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Error	Normal	True	Application
	The Message Queuing service resource cannot bind to the cluster IP address.	The Message Queuing service resource cannot bind to the cluster IP address.	Microsoft.MSMQ.6.3.Rule.Alert.Event2168	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2168	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queueing routing server is operating in workgroup mode.	Message Queueing routing server is operating in workgroup mode.	Microsoft.MSMQ.6.3.Rule.Alert.Event2169	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2169	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing failed to bind to port 1801.	Message Queuing failed to bind to port 1801.	Microsoft.MSMQ.6.3.Rule.Alert.Event2170	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2170	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing cannot bind to UDP port 3527.	Message Queuing cannot bind to UDP port 3527.	Microsoft.MSMQ.6.3.Rule.Alert.Event2171	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2171	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Error	Normal	True	Application
	The MsmqServices object is configured with weakened security to support MSMQ 1.	The MsmqServices object is configured with weakened security to support MSMQ 1.	Microsoft.MSMQ.6.3.Rule.Alert.Event2172	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2172	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Error	Normal	True	Application
	Message Queueing not using strong encryption.	Message Queueing not using strong encryption.	Microsoft.MSMQ.6.3.Rule.Alert.Event2175	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2175	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Error	Normal	True	Application
	Message Queueing service unable to check sender access.	Message Queueing service unable to check sender access.	Microsoft.MSMQ.6.3.Rule.Alert.Event2177	Microsoft.MSMQ.6.3.Queues	ConfigurationHealth	False			0	0		True	Warning	Normal	True	Application
	Storage quota exceeded for MSMQ queue. No more messages can be stored in the queue.	Storage quota exceeded for MSMQ queue. No more messages can be stored in the queue.	Microsoft.MSMQ.6.3.Rule.Alert.Event2182	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2182	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Machine MSMQ storage quota was exceeded or there is insufficient disk space.	Machine MSMQ storage quota was exceeded or there is insufficient disk space. No more Messages can be stored in user queues. Need to get message storage below the quota.	Microsoft.MSMQ.6.3.Rule.Alert.Event2183	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2183	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing could not resolve a name to an IP address.	Message Queuing could not resolve a name to an IP address.	Microsoft.MSMQ.6.3.Rule.Alert.Event2184	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2184	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	A socket operation failed.	A socket operation failed. Message Queuing cannot send the message now, but it will retry to send the message.	Microsoft.MSMQ.6.3.Rule.Alert.Event2185	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2185	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing connection was refused by the recipient computer.	Message Queuing connection was refused by the recipient computer	Microsoft.MSMQ.6.3.Rule.Alert.Event2187	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2187	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing could not access Active Directory and failed to compute routing path	Message Queuing could not access Active Directory and failed to compute routing path for messages sent to queue. Messages will wait in the outgoing queue until connection with Active Directory is restored.	Microsoft.MSMQ.6.3.Rule.Alert.Event2188	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2188	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing failed to send a message due to low memory.	Message Queuing failed to send a message due to low memory.	Microsoft.MSMQ.6.3.Rule.Alert.Event2189	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2189	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing could not complete SSL negotiation with the remote computer.	Message Queuing could not complete SSL negotiation with the remote computer.	Microsoft.MSMQ.6.3.Rule.Alert.Event2190	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2190	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing could not validate server certificate in HTTPS scenario. This certificate cannot be trusted.	Message Queuing could not validate server certificate in HTTPS scenario because the certificate was found in disallowed store. This means the certificate cannot be trusted.	Microsoft.MSMQ.6.3.Rule.Alert.Event2191	Microsoft.MSMQ.6.3.Servers	SecurityHealth	False			0	2192	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing could not establish SSL connection with the recipient computer.	Message Queuing could not establish SSL connection with the recipient computer because a trust chain from the server certificate to a trusted Certificate Authority certificate could not be established.	Microsoft.MSMQ.6.3.Rule.Alert.Event2192	Microsoft.MSMQ.6.3.Servers	SecurityHealth	False			0	2192	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing could not establish SSL connection with the recipient computer	Message Queuing could not establish SSL connection with the recipient computer because the computer name specified in the HTTP queue format name does not match the name of the recipient server certificate.	Microsoft.MSMQ.6.3.Rule.Alert.Event2193	Microsoft.MSMQ.6.3.Servers	SecurityHealth	False			0	2193	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The Message Queuing service cannot communicate with other computers.	The Message Queuing service cannot communicate with other computers, because the select API for socket failed.	Microsoft.MSMQ.6.3.Rule.Alert.Event2194	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2194	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing could not authenticate a message sent to queue.	Message Queuing could not authenticate a message sent to queue. The message was rejected because the queue only accepts authenticated messages. A negative arrival acknowledgement will be sent if requested by the sender.	Microsoft.MSMQ.6.3.Rule.Alert.Event2195	Microsoft.MSMQ.6.3.Servers	SecurityHealth	False			0	2195	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing failed to verify digital signature of a message sent to queue.	Message Queuing failed to verify digital signature of a message sent to queue. The message was rejected. A negative arrival acknowledgement will be sent if requested by the sender.	Microsoft.MSMQ.6.3.Rule.Alert.Event2196	Microsoft.MSMQ.6.3.Servers	SecurityHealth	False			0	2196	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing failed to listen on the IPv6 protocol.	Message Queuing failed to listen on the IPv6 protocol. Messages will not be accepted on IPv6.	Microsoft.MSMQ.6.3.Rule.Alert.Event2197	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2197	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing failed to listen on IPv4 protocol	Message Queuing failed to listen on IPv4 protocol. Messages will not be accepted on IPv4.	Microsoft.MSMQ.6.3.Rule.Alert.Event2198	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2198	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing Service failed to listen on both IPv4 and IPv6 protocol	Message Queuing Service failed to listen on both IPv4 and IPv6 protocol. Messages will not be accepted from the network through TCP/IP protocols. Messages addressed to this machine using TCP/IP protocols will not arrive but will accumulate in sender's outgoing queues.	Microsoft.MSMQ.6.3.Rule.Alert.Event2199	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2199	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Error	Normal	True	Application
	Message Queuing Triggers initialization failed.	Message Queuing Triggers initialization failed.	Microsoft.MSMQ.6.3.Rule.Alert.Event2201	Microsoft.MSMQ.6.3.Triggers	AvailabilityHealth	False			0	2201	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing Triggers failed to create an instance of the Triggers Transactional object.	Message Queuing Triggers failed to create an instance of the Triggers Transactional object.	Microsoft.MSMQ.6.3.Rule.Alert.Event2202	Microsoft.MSMQ.6.3.Triggers	AvailabilityHealth	False			0	2202	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The trigger information cannot be retrieved from the trigger store in registry. At least one trigger is nonfunctional.	The trigger information cannot be retrieved from the trigger store in registry. At least one trigger is nonfunctional.	Microsoft.MSMQ.6.3.Rule.Alert.Event2203	Microsoft.MSMQ.6.3.Triggers	AvailabilityHealth	False			0	2203	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The information for the attached rule cannot be retrieved from the trigger store.	The information for the attached rule cannot be retrieved from the trigger store.	Microsoft.MSMQ.6.3.Rule.Alert.Event2204	Microsoft.MSMQ.6.3.Triggers	AvailabilityHealth	False			0	2204	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Opening the queue for peeking at or retrieving messages failed.	Opening the queue for peeking at or retrieving messages failed.	Microsoft.MSMQ.6.3.Rule.Alert.Event2205	Microsoft.MSMQ.6.3.Queues	AvailabilityHealth	False			0	0		True	Warning	Normal	True	Application
	Opening an internal queue needed by the Triggers service failed.	Opening an internal queue needed by the Triggers service failed.	Microsoft.MSMQ.6.3.Rule.Alert.Event2206	Microsoft.MSMQ.6.3.Triggers	AvailabilityHealth	False			0	2206	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	An instance of a rule handler for the rule was not created.	An instance of a rule handler for the rule was not created. The rule cannot be evaluated and executed. The MSMQTriggerObjects.MSMQRuleHandler class may not be registered, or your System folder does not contain mqtrig.dll.	Microsoft.MSMQ.6.3.Rule.Alert.Event2207	Microsoft.MSMQ.6.3.Triggers	AvailabilityHealth	False			0	2207	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The action or a condition parameter for the rule was not parsed.	The action or a condition parameter for the rule was not parsed. The rule cannot be evaluated and executed.	Microsoft.MSMQ.6.3.Rule.Alert.Event2208	Microsoft.MSMQ.6.3.Triggers	AvailabilityHealth	False			0	2208	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The action defined by the rule was not invoked.	The action defined by the rule was not invoked.	Microsoft.MSMQ.6.3.Rule.Alert.Event2209	Microsoft.MSMQ.6.3.Triggers	AvailabilityHealth	False			0	2209	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Rule evaluation or execution failed for the transactional trigger.	Rule evaluation or execution failed for the transactional trigger.	Microsoft.MSMQ.6.3.Rule.Alert.Event2210	Microsoft.MSMQ.6.3.Triggers	AvailabilityHealth	False			0	2210	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Trigger associated with this queue is nonfunctional.	Trigger associated with this queue is nonfunctional.	Microsoft.MSMQ.6.3.Rule.Alert.Event2212	Microsoft.MSMQ.6.3.Triggers	AvailabilityHealth	False			0	2212	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	At least one of the required dependencies was not found.	At least one of the required dependencies was not found. Please verify that MSMQ Triggers resources are dependent on Message Queue resources.	Microsoft.MSMQ.6.3.Rule.Alert.Event2213	Microsoft.MSMQ.6.3.Triggers	ConfigurationHealth	False			0	2213	MSMQ Triggers Cluster Resource DLL	True	Warning	Normal	True	Application
	Unable to update EventLog information in registry.	Unable to update EventLog information in registry.	Microsoft.MSMQ.6.3.Rule.Alert.Event2214	Microsoft.MSMQ.6.3.Triggers	ConfigurationHealth	False			0	2214	MSMQ Triggers Cluster Resource DLL	True	Warning	Normal	True	Application
	The Triggers transactional component could not be registered in COM+.	The Triggers transactional component could not be registered in COM+.	Microsoft.MSMQ.6.3.Rule.Alert.Event2215	Microsoft.MSMQ.6.3.Triggers	AvailabilityHealth	False			0	2215	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Network Service account will not take effect until Triggers service is restarted.	Network Service account will not take effect until Triggers service is restarted.	Microsoft.MSMQ.6.3.Rule.Alert.Event2219	Microsoft.MSMQ.6.3.Triggers	ConfigurationHealth	False			0	2219	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Configured IP address is not valid.	Configured IP address is not valid.	Microsoft.MSMQ.6.3.Rule.Alert.Event2220	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2220	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing will not be able to accept messages temporarily because system paged pool is low.	Message Queuing will not be able to accept messages temporarily because system paged pool is low.	Microsoft.MSMQ.6.3.Rule.Alert.Event2250	Microsoft.MSMQ.6.3.Servers	PerformanceHealth	False			0	2250	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Message Queuing will not be able to accept messages temporarily because system commit is high.	Message Queuing will not be able to accept messages temporarily because system commit is high. No manual intervention is required at this stage. Once memory utilization has normalized, Message Queuing will automatically resume accepting messages.	Microsoft.MSMQ.6.3.Rule.Alert.Event2251	Microsoft.MSMQ.6.3.Servers	AvailabilityHealth	False			0	2251	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The message could not be moved to deadletter queue.	The message could not be moved to deadletter queue. The message was moved to the system transactional dead letter queue.	Microsoft.MSMQ.6.3.Rule.Alert.Event2253	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2253	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The message could not be moved to deadletter queue. The authenticity of the message could not be verified.	The message could not be moved to deadletter queue. The deadletter queue is authenticated and the authenticity of the message could not be verified. The message will be moved to the system transactional dead letter queue.	Microsoft.MSMQ.6.3.Rule.Alert.Event2254	Microsoft.MSMQ.6.3.Servers	SecurityHealth	False			0	2254	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The message could not be moved to deadletter queue. Deadletter queues should not require privacy of messages.	The message could not be moved to deadletter queue. Deadletter queues should not require privacy of messages. The message will be moved to the system transactional dead letter queue.	Microsoft.MSMQ.6.3.Rule.Alert.Event2255	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2255	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	The message could not be moved to deadletter queue. The deadletter queue needs to be transactional.	The message could not be moved to deadletter queue. The deadletter queue needs to be transactional. The message will be moved to the system transactional dead letter queue.	Microsoft.MSMQ.6.3.Rule.Alert.Event2256	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	False			0	2256	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	True	Warning	Normal	True	Application
	Performance Counters not available for server.	Performance Counters not available for server.	Microsoft.MSMQ.6.3.Rule.Alert.PerformanceCountersNotAvailable	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	True			0	0		True	Warning	Normal	True	Operations Manager
	Message Queuing Service objects were successfully created.	Message Queuing Service objects were successfully created.	Microsoft.MSMQ.6.3.Rule.Collect.Event2023Server	Microsoft.MSMQ.6.3.Servers	EventCollection	False			0	2023	MSMQ Cluster Resource DLL	False			True	Application
	Message Queuing Triggers Service objects were successfully created.	Message Queuing Triggers Service objects were successfully created.	Microsoft.MSMQ.6.3.Rule.Collect.Event2023Triggers	Microsoft.MSMQ.6.3.Triggers	EventCollection	False			0	2023	MSMQTriggers Cluster Resource DLL	False			True	Application
	Cluster: The Message Queuing service started.	The Message Queuing service started in the cluster.	Microsoft.MSMQ.6.3.Rule.Collect.Event2024Server	Microsoft.MSMQ.6.3.Servers	EventCollection	False			0	2024	MSMQ Cluster Resource DLL	False			True	Application
	Cluster: The Message Queuing Triggers Service started.	The Message Queuing service started in the cluster.	Microsoft.MSMQ.6.3.Rule.Collect.Event2024Triggers	Microsoft.MSMQ.6.3.Triggers	EventCollection	False			0	2024	MSMQTriggers Cluster Resource DLL	False			True	Application
	The Message Queuing service started.	Microsoft Message Queuing (MSMQ) Service Initialization prepares the MSMQ Service for startup. Problems during initialization may prevent Message Queuing as a whole from starting up or may prevent a feature or subset of features from functioning properly.	Microsoft.MSMQ.6.3.Rule.Collect.Event2028	Microsoft.MSMQ.6.3.Servers	EventCollection	False			0	2028	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	Message Queuing service is online.	Message Queuing service is online.	Microsoft.MSMQ.6.3.Rule.Collect.Event2060	Microsoft.MSMQ.6.3.Servers	EventCollection	False			0	2060	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	Expression cannot be recovered for the checkpoint.	Expression cannot be recovered for the checkpoint.	Microsoft.MSMQ.6.3.Rule.Collect.Event2078	Microsoft.MSMQ.6.3.Servers	EventCollection	False			0	2078	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	The Message Queuing service successfully joined the computers domain.	The Message Queuing service successfully joined the computers domain.	Microsoft.MSMQ.6.3.Rule.Collect.Event2125	Microsoft.MSMQ.6.3.Servers	EventCollection	False			0	2125	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	Message Queuing operating in workgroup mode.	Message Queuing operating in workgroup mode.	Microsoft.MSMQ.6.3.Rule.Collect.Event2126	Microsoft.MSMQ.6.3.Servers	EventCollection	False			0	2126	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	A multicast listener initialization failed.	A multicast listener initialization failed.	Microsoft.MSMQ.6.3.Rule.Collect.Event2154	Microsoft.MSMQ.6.3.Servers	EventCollection	False			0	2154	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	The Message Queuing service stopped.	The Message Queuing service stopped.	Microsoft.MSMQ.6.3.Rule.Collect.Event2163	Microsoft.MSMQ.6.3.Servers	EventCollection	False			0	2163	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	The Message Queuing service cannot join Windows NT 4.0 domain.	The Message Queuing service cannot join Windows NT 4.0 domain.	Microsoft.MSMQ.6.3.Rule.Collect.Event2166	Microsoft.MSMQ.6.3.Servers	EventCollection	False			0	2166	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	Message Queuing is operating in Hardened mode.	Message Queuing is operating in Hardened mode.	Microsoft.MSMQ.6.3.Rule.Collect.Event2167	Microsoft.MSMQ.6.3.Servers	EventCollection	False			0	2167	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	The MsmqServices object is configured with default security.	The MsmqServices object is configured with default security.	Microsoft.MSMQ.6.3.Rule.Collect.Event2173	Microsoft.MSMQ.6.3.Servers	EventCollection	False			0	2173	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	Message Queuing found multiple IP addresses for the local computer.	Message Queuing found multiple IP addresses for the local computer.	Microsoft.MSMQ.6.3.Rule.Collect.Event2176	Microsoft.MSMQ.6.3.Servers	EventCollection	False			0	2176	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	Message Queuing Triggers started successfully.	Message Queuing Triggers started successfully.	Microsoft.MSMQ.6.3.Rule.Collect.Event2200	Microsoft.MSMQ.6.3.Triggers	EventCollection	False			0	2200	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	Message Queuing Triggers service stopped.	Message Queuing Triggers service stopped.	Microsoft.MSMQ.6.3.Rule.Collect.Event2211	Microsoft.MSMQ.6.3.Triggers	EventCollection	False			0	2211	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	Retrieving messages from a queue located on a remote pre-Windows XP computer is not supported.	Retrieving messages from a queue located on a remote pre-Windows XP computer is not supported. All triggers associated with the queue are nonfunctional.	Microsoft.MSMQ.6.3.Rule.Collect.Event2216	Microsoft.MSMQ.6.3.Triggers	EventCollection	False			0	2216	$Target/Host/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	Message Queuing will use the provided IP address.	Message Queuing will use the provided IP address.	Microsoft.MSMQ.6.3.Rule.Collect.Event2221	Microsoft.MSMQ.6.3.Servers	EventCollection	False			0	2221	$Target/Property[Type="Microsoft.MSMQ.6.3.ServerRole"]/ServiceName$	False			True	Application
	Collect Dead Letter Queue KBytes	Collects the number of message KBytes in the Dead Letter Queue.	Microsoft.MSMQ.6.3.Rule.CollectDeadLetterBytes	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True			0	0		False			True
	Collect Dead Letter Queue Message Count	Collects the number of messages in the Dead Letter Queue.	Microsoft.MSMQ.6.3.Rule.CollectDeadLetterQueueCount	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True			0	0		False			True
	Collect MSMQ Log Detail Script Events	Collect MSMQ Log Detail Script Events	Microsoft.MSMQ.6.3.Rule.CollectLogDetailEvents	Microsoft.MSMQ.6.3.Servers	EventCollection	True			0	0	Health Service Script	False			True	Operations Manager
	Collect Queue Bytes	Collect Queue Bytes	Microsoft.MSMQ.6.3.Rule.CollectQueueBytes	Microsoft.MSMQ.6.3.Queues	PerformanceCollection	True			0	0		False			True
	Collect Queue Bytes Baseline Learning	Collect Queue Bytes Baseline Learning	Microsoft.MSMQ.6.3.Rule.CollectQueueBytes.Learning	Microsoft.MSMQ.6.3.Queues	PerformanceCollection	True			0	0		False			True
	Collect Queue Journal Bytes	Collect Queue Journal Bytes	Microsoft.MSMQ.6.3.Rule.CollectQueueJournalBytes	Microsoft.MSMQ.6.3.Queues	PerformanceCollection	True			0	0		False			True
	Collect Queue Journal Message Count	Collect Queue Journal Message Count	Microsoft.MSMQ.6.3.Rule.CollectQueueJournalMessageCount	Microsoft.MSMQ.6.3.Queues	PerformanceCollection	True			0	0		False			True
	Collect Queue Journal Percentage	Collect Queue Journal Percentage	Microsoft.MSMQ.6.3.Rule.CollectQueueJournalPercentage	Microsoft.MSMQ.6.3.Queues	PerformanceCollection	True			0	0		False			True
	Collect Queue Message Count	Collect Queue Message Count	Microsoft.MSMQ.6.3.Rule.CollectQueueMessageCount	Microsoft.MSMQ.6.3.Queues	PerformanceCollection	True			0	0		False			True
	Collect Queue Message Count Baseline Learning	Collect Queue Message Count Baseline Learning	Microsoft.MSMQ.6.3.Rule.CollectQueueMessageCount.Learning	Microsoft.MSMQ.6.3.Queues	PerformanceCollection	True			0	0		False			True
	Collect Queue Quota Pctg	Collect Queue Quota Pctg	Microsoft.MSMQ.6.3.Rule.CollectQueueQuotaPercentage	Microsoft.MSMQ.6.3.Queues	PerformanceCollection	True			0	0		False			True
	Collect MSMQ Service:Sessions	Collect MSMQ Service:Sessions	Microsoft.MSMQ.6.3.Rule.CollectSessions	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True	MSMQ Service	Sessions	900	0		False			True
	Collect Total Bytes in All Queues	Collect Total Bytes in All Queues	Microsoft.MSMQ.6.3.Rule.CollectTotalBytesInAllQueues	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True	MSMQ Service	Total bytes in all queues	900	0		False			True
	Collect Total Messages in All Queues	Collect Total Messages in All Queues	Microsoft.MSMQ.6.3.Rule.CollectTotalMessagesInAllQueues	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True	MSMQ Service	Total messages in all queues	900	0		False			True
	Performance Collection Rule for STT Monitor [Incoming Messages/sec]	Performance Collection rule for Monitor 'Incoming Messages/sec'	Microsoft.MSMQ.6.3.Rule.IncomingMessages.Collection	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True	MSMQ Service	Incoming Messages/sec	900	0		False			True
	Signature Collection Rule for STT Monitor [Incoming Messages/sec]	Signature Collection rule for Monitor 'Incoming Messages/sec'	Microsoft.MSMQ.6.3.Rule.IncomingMessages.Learning	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True	MSMQ Service	Incoming Messages/sec	900	0		False			True
	Collection for Private Bytes	Collection for Private Bytes	Microsoft.MSMQ.6.3.Rule.Memory.Collection	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True	Process	Private Bytes	900	0		False			True
	Baseline learning for Private Bytes	Baseline learning for Private Bytes	Microsoft.MSMQ.6.3.Rule.Memory.Learning	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True	Process	Private Bytes	900	0		False			True
	Performance Collection Rule for STT Monitor [Outgoing Messages/sec]	Performance Collection rule for Monitor 'Outgoing Messages/sec'	Microsoft.MSMQ.6.3.Rule.OutgoingMessages.Collection	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True	MSMQ Service	Outgoing Messages/sec	900	0		False			True
	Signature Collection Rule for STT Monitor [Outgoing Messages/sec]	Signature Collection rule for Monitor 'Outgoing Messages/sec'	Microsoft.MSMQ.6.3.Rule.OutgoingMessages.Learning	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True	MSMQ Service	Outgoing Messages/sec	900	0		False			True
	Collection for Processor Time	Collection for Processor Time	Microsoft.MSMQ.6.3.Rule.Processor.Collection	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True	Process	\% Processor Time	900	0		False			True
	Baseline learning for Processor Time	Baseline learning for Processor Time	Microsoft.MSMQ.6.3.Rule.Processor.Learning	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True	Process	\% Processor Time	900	0		False			True
	Error searching Active Directory while discovering public queues	Error searching Active Directory while discovering public queues	Microsoft.MSMQ.6.3.Rule.ScriptError.DiscoverQueues.ADLookup	Microsoft.MSMQ.6.3.Servers	ConfigurationHealth	True			0	14231	Health Service Script	True	Error	Normal	True	Operations Manager
	Could not connect to queue for Queue Discovery.	Could not connect to queue for Queue Discovery.	Microsoft.MSMQ.6.3.Rule.ScriptError.DiscoverQueues.QueueConnection	Microsoft.MSMQ.6.3.Servers	Discovery	True			0	0		True	Warning	Normal	True	Operations Manager
	Baseline learning for Total Bytes in All Queues	Baseline learning for Total Bytes in All Queues	Microsoft.MSMQ.6.3.Rule.TotalBytes.Learning	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True	MSMQ Service	Total bytes in all queues	900	0		False			True
	Baseline learning for Total Messages in All Queues	Baseline learning for Total Messages in All Queues	Microsoft.MSMQ.6.3.Rule.TotalMessages.Learning	Microsoft.MSMQ.6.3.Servers	PerformanceCollection	True	MSMQ Service	Total messages in all queues	900	0		False			True