Knowledge Article: ID B00022017: Standby MM primary file system failed.

Description

The primary firmware image for the standby advanced management module failed during built-in self test (BIST); the image might be corrupt.

Causes

The BIST checks which file system is used.

Implications

Using the backup file system instead of the primary file system generates this event.

Resolutions

Perform these steps at your earliest convenience:

1. Update the firmware for the advanced management module. You might need to initiate a failover to make this advanced management module the primary advanced management module to update the firmware.
   
2. Generate a manual call home using Service Advisor to replace the advanced management module.
   

Additional information

To find additional troubleshooting help, visit the "IBM Support & downloads" Web site, select "BladeCenter" for "Browse products for support" panel. At "Support & downloads quick start" page, select your product for "Choose your products", and "Troubleshooting" for "Choose your page", then select "View your page" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.

To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.