Description
The primary advanced management module mass storage firmware update on the primary advanced management module has failed because the advanced management module could not access the firmware storage.
Causes
The advanced management module attempts communication with the mass storage, but fails to read the firmware.
Implications
The failure generates this event.
Resolutions
Verify that the remote drive is still functioning correctly. If so, no action is required.
If the remote drive is not functioning correctly, perform these steps:
Additional information
To find additional troubleshooting help, visit the "IBM Support & downloads" Web site, select "BladeCenter" for "Browse products for support" panel. At "Support & downloads quick start" page, select your product for "Choose your products", and "Troubleshooting" for "Choose your page", then select "View your page" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.
To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.