Description
The temperature for the specified CPU is the specified blade server is over the fault threshold.
Causes
The CPU sensor detects that the temperature of the CPU is over the fault threshold.
Implications
The temperature that is over the fault threshold generates this event.
Resolutions
Perform these steps:
Note: If the over voltage problem is occurring on all blade servers in the same power domain, the problem might be in one of the power supplies that powers that domain (log in to the advanced management module to see the power supplies that are associated with each power domain). Replace the power supplies, one at a time, to see if the problem resolves.
Additional information
To find additional troubleshooting help, visit the "IBM Support & downloads" Web site, select "BladeCenter" for "Browse products for support" panel. At "Support & downloads quick start" page, select your product for "Choose your products", and "Troubleshooting" for "Choose your page", then select "View your page" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.
To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.