Knowledge Article: ID B0421D401: CPU %d temperature warning

Description

The temperature for the specified CPU in the specifed blade server is over recommended threshold.

Causes

The temperature sensor detects that the temperature for the specified CPU is above the recommended temperature.

Implications

A temperature that is above the recommended temperature generates this event.

Resolutions

Perform these steps:

  1. Check the room ambient temperature to ensure that it is within the operating specifications for the chassis.
  2. verify that all fan/blower modules are running. Replace fan modules if necessary.
  3. verify that a device or filler is installed in each bay in the front and rear of the chassis, and verify that there is nothing covering the bays. Any missing components can cause a major reduction in airflow for the blade server.
  4. Verify that there is nothing covering the media tray (that will disrupt the airflow to the ambient temperature sensor).

Additional information

To find additional troubleshooting help, visit the "IBM Support & downloads" Web site, select "BladeCenter" for "Browse products for support" panel. At "Support & downloads quick start" page, select your product for "Choose your products", and "Troubleshooting" for "Choose your page", then select "View your page" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.

To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.