Description
The current in the specified power module exceeds the current nominal fault threshold of +48V.
Causes
The current for the specified power module is above the +48V source fault threshold.
Implications
A current above the 48V threshold generates this event.
Resolutions
Perform these steps:
Note: Before reseating or replacing a power module, verify that you have enough power modules in the chassis to power the remaining components in the chassis. Otherwise, components might power off, which can disrupt BladeCenter system operations.
Note: (DC Current) Only trained service personnel, other than IBM service technicians, are authorized to make the connections to and disconnections from the -48 volt DC power source. IBM service technicians are not certified or authorized to install or remove the -48 volt power cable. The customer is responsible for ensuring that only trained service personnel install or remove the -48 volt power cable.
Additional information
To find additional troubleshooting help, visit the "IBM Support & downloads" Web site, select "BladeCenter" for "Browse products for support" panel. At "Support & downloads quick start" page, select your product for "Choose your products", and "Troubleshooting" for "Choose your page", then select "View your page" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.
To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.