Description
The fabric type of an expansion card option in the specified blade server is not compatible with an I/O module in the I/O module bay. Data might not be passed on one or more possible connections.
Causes
The management module detects that the specified blade expansion card is incompatible with I/O Module.
Implications
This event is generated.
Resolutions
Verify that the network is set up as desired. To verify the network configuration from the advanced management module Web interface, click Blades > I/O compatibility. If the network configuration is correct, no action is required. Otherwise, verify that the fabric type of the expansion card option in the specified blade server is compatible with the fabric type of the I/O module.
Additional information
To find additional troubleshooting help, visit the "IBM Support & downloads" Web site, select "BladeCenter" for "Browse products for support" panel. At "Support & downloads quick start" page, select your product for "Choose your products", and "Troubleshooting" for "Choose your page", then select "View your page" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.
To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.
Home