Description
Not enough cooling capacity exists to power on the specified storage module. This typically occurs because the power module in the power module bay directly behind the specified storage module is either not installed or has failed.
Causes
For the system to have sufficient cooling, all fans must be working properly and power modules installed.
Implications
For a storage module to power on, you must have a functioning power module installed behind the storage module. You could have a functioning power module, but the fans in the power module have failed.
Resolutions
Perform these steps:
Additional information
To find additional troubleshooting help, visit the "IBM Support & downloads" Web site, select "BladeCenter" for "Browse products for support" panel. At "Support & downloads quick start" page, select your product for "Choose your products", and "Troubleshooting" for "Choose your page", then select "View your page" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.
To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.
Home