Knowledge Article: ID B0EA0C001: I/O module %d incompatible with blade configuration

Description

The I/O fabric type for the expansion card option in the blade server is not compatible with the specified I/O module.

Causes

The expansion card option in the blade server is not compatible with the fabric type of the I/O module.

Implications

When the I/O fabric type for the expansion card option is of not the correct type, this event is generated.

Resolutions

Make sure that the expansion card option in the blade server and the I/O module are compatible (are of the same I/O fabric type).

Additional information

To find additional troubleshooting help, visit the "IBM Support & downloads" Web site, select "BladeCenter" for "Browse products for support" panel. At "Support & downloads quick start" page, select your product for "Choose your products", and "Troubleshooting" for "Choose your page", then select "View your page" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.

To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.