Knowledge Article: ID B0EA0D701: Change port speed/mode on I/O module %d failed

Description

The port speed and mode for the specified I/O module was not changed.

Causes

You have attempted to change the port speed and mode state on the specified I/O module but the change has failed.

Implications

The port speed and mode for the specified I/O module will not be changed to the new state.

Resolutions

Perform these steps:

1. Check the user permissions to ensure that the user has the authority to change the port speed and mode. See the Advanced Management Module User"s Guide for more information about user roles.
   
   
2. Attempt to change the port speed and mode again.
   
   
3. Check the event log for other errors related to the I/O module (such as communication errors between the advanced management module and the I/O module).
   
   
4. Check advanced management module system status panel to ensure the switch is functioning.

Additional information

To find additional troubleshooting help, visit the "IBM Support & downloads" Web site, select "BladeCenter" for "Browse products for support" panel. At "Support & downloads quick start" page, select your product for "Choose your products", and "Troubleshooting" for "Choose your page", then select "View your page" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.

To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.