Knowledge Article: ID B0EA0E201: I/O Module %d"s current user defined zone configuration was not activated since the zone configuration was not created for this chassis.

Description

The user-defined zone for the specified I/O module was not activated because the zone configuration does not match what the advanced management module expects for this I/O module.

Causes

When a SAS I/O module has been detected, the advanced management module checks to ensure there is an active zone configuration.

Implications

When a mismatch of active zone identifier occurs, this event is generated.

Resolutions

Activate an appropriate zone configuration for the specified I/O module.

Additional information

To find additional troubleshooting help, visit the "IBM Support & downloads" Web site, select "BladeCenter" for "Browse products for support" panel. At "Support & downloads quick start" page, select your product for "Choose your products", and "Troubleshooting" for "Choose your page", then select "View your page" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.

To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.