Knowledge Article: ID B0EA0E701: An error on I/O Module %d was detected.

Description

The specified SAS RAID controller module has detected an error condition.

Causes

During RAID configuration, the SAS Controller Module has encountered an error.

Implications

When an error condition occurs, this event is generated.

Resolutions

Perform these steps:

  1. Log in to SAS RAID controller through either Storage Configuration Manager or through the Command-line interface (CLI) to determine the cause of this event.

  2. See the IBM BladeCenter SAS RAID Controller Module Installation and User"s Guide for more information about resolving the problem. The guide is available on the Web.

Additional information

To find additional troubleshooting help, visit the "IBM Support & downloads" Web site, select "BladeCenter" for "Browse products for support" panel. At "Support & downloads quick start" page, select your product for "Choose your products", and "Troubleshooting" for "Choose your page", then select "View your page" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.

To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.