Knowledge Article: ID B0EA0FB01: Setting of the active zone configuration number failed for I/O Module %d.

Description

The advanced management module is unable to set the active zone configuration for the specified SAS I/O module.

Causes

The advanced management module attempted to set the active zone configuration for the SAS I/O module but fails.

Implications

When this occurs, this event is generated.

Resolutions

Perform these steps:

1. Wait a few minutes and attempt to apply the zone configuration again (the SAS I/O module may be busy).
   
   
2. Search the event log for other events related to this SAS I/O module and resolve those events.
   
   
3. Access the Web interface for the SAS I/O module and resolve any errors that you find.
   
   
4. Access the interface for any attached storage devices and resolve any errors that you find.
   
   

Additional information

To find additional troubleshooting help, visit the "IBM Support & downloads" Web site, select "BladeCenter" for "Browse products for support" panel. At "Support & downloads quick start" page, select your product for "Choose your products", and "Troubleshooting" for "Choose your page", then select "View your page" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.

To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.