Knowledge Article: ID B0EA0FF01: I/O Module %d has no active zone configuration since neither the AMM nor the I/O Module have an active zone configuration.

Description

The SAS I/O module does not have an active zone configuration.

Causes

The advanced management module has discovered or detected a SAS I/O module but is unable to determine the active zone configuration for the SAS I/O module.

Implications

When this occurs, this event is generated.

Resolutions

Apply an active zone configuration for the SAS I/O modules.

Additional information

To find additional troubleshooting help, visit the "IBM Support & downloads" Web site, select "BladeCenter" for "Browse products for support" panel. At "Support & downloads quick start" page, select your product for "Choose your products", and "Troubleshooting" for "Choose your page", then select "View your page" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.

To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.