Knowledge Article: ID B6F60A101: Alarm Panel module hardware failure.

Description

The alarm panel module, which is the LED panel on the front of the chassis, has failed.

Causes

The system management bus monitor either cannot read the alarm panel or detects that the alarm panel LED does not match user settings.

Implications

The failure generates this event.

Resolutions

Perform these steps:

  1. Reseat the alarm panel.
  2. Replace the alarm panel.

Additional information

To find additional troubleshooting help, visit the "IBM Support & downloads" Web site, select "BladeCenter" for "Browse products for support" panel. At "Support & downloads quick start" page, select your product for "Choose your products", and "Troubleshooting" for "Choose your page", then select "View your page" for "See your results". To narrow the results, search with keywords that are related to this article, such as "fail", "Chassis", etc. in the "Search support" field at the right panel.

To download the latest firmware or drivers, visit the "Fix Central" Web site, select "BladeCenter" for "Product Group" (from the pull-down lists), select your product for "Product" (from the pull-down lists), select your product machine type for "Product" (from the pull-down lists), and select your operating system for "Operating system" (from the pull-down lists). You can refine the search by selecting the category of the download of your interest from the "Refine results" list.